The Snow Joe 324E is the subject of this page, and the notes below are specific to it.
Snow Joe 324E Electric Snow Shovel | 11-Inch | 10 Amp Motor| Headlights is an electrical component, part of the low voltage circuit that runs the switches, lighting and starting on the machine. The cut is 11 inches wide. It is listed under Parts and Accessories. Current draw is 10 amps from a standard household circuit. The stock number is 324E. Use 324E when you order and the right item arrives the first time.
On this page
- Where the Snow Joe 324E fits
- Key figures
- Getting the fitment right
- Fitting it
- Ordering from us
- Regional notes
- When this is the fault
- Reading the listing
- What else to check
- The autumn order
- A corded shovel, and the case for never thinking about batteries
- What the 10 amp motor actually delivers
- Full specification
- The cord is the compromise, so be honest about it
- Choosing the extension lead properly
- Why a corded tool suits some households perfectly
- Running costs, which are close to nothing
- What customers ask
Where the Snow Joe 324E fits
Electrical parts on a snow blower live in the worst environment on the machine: wet, salted and repeatedly frozen. Vibration works connectors loose over a season, and water follows the gap in.
Current draw is 10 amps from a standard household circuit. It is a Snow Joe item. The stock number is 324E. It is listed under Parts and Accessories. The figure is $174.21, quoted the way every price on this site is quoted, in Canadian dollars.

Key figures
| Detail | Value |
|---|---|
| Stock number | 324E |
| Brand | Snow Joe |
| Width | 11 in |
| Current draw | 10 A |
| Category | Parts and Accessories |
| Price | $174.21 CAD |
| Ships | Canada wide |
The listed price is $174.21 CAD and that is the figure you pay, because the stock is already in the country. Stock moves quickly once the snow starts, which is the only real argument for ordering early.
Getting the fitment right
If you are cross referencing an old component, compare the stamping against 324E before ordering. Model names persist for years while the components underneath them do not.
Check continuity end to end before condemning a component. Do not pull on the wire to separate a plug. Release the latch and pull the housing.
Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.
Fitting it
Isolate the machine before you start. Nothing on this job needs the engine turning. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.
Disconnect the power source first, then clean the connector faces and protect them with dielectric grease. A side by side check catches the small dimensional differences that photographs never show.
The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.
Ordering from us
The figure is $174.21, quoted the way every price on this site is quoted, in Canadian dollars. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.
What can go back, in what condition and at whose cost is on returns and refunds. the warranty policy explains what the manufacturer covers and what counts as a consumable.
Use the contact page if you want a second opinion before ordering. Consumer rights when buying the Snow Joe 324E in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Regional notes
If you are clearing in the northern territories, the local pattern is extreme cold that changes how every material behaves. Late summer through October is when choice is widest across the whole catalogue.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
When this is the fault
If the machine is doing any of the following, this is the component to examine first.
- a fuse that blows again shortly after replacement
- a wire chafed through where it passes the frame
- intermittent operation that changes when the harness is moved
- a light or switch that works warm and fails cold
- a starter that clicks without turning
These components rarely wear out. They corrode. There is no price advantage in waiting and there is a real availability cost.
Reading the listing
The distinguishing terms here are 324e, electric, shovel, amp, motor, headlights. Left and right are not interchangeable even when the castings appear symmetrical.
This line is 324E. The 11 inch figure is the clearing width rather than the overall width of the machine. The 10 amp figure is the draw from a standard circuit. Quote it exactly and the right item arrives first time.
What else to check
A repair is cheapest when everything that needs doing is done at the same time. Have a look at the fasteners you have just disturbed too. Now is the moment to inspect the covers and guards for cracks. Add the pack contacts to the same inspection.
All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
The autumn order
Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.
All of it sits on snow blower parts and ships Canada wide from stock held here. The parts everybody wants in February are the parts that are slowest to arrive in February. An unheated shed is fine. A puddle on a garage floor is not.
Before you commit to the Snow Joe 324E, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a electric snow shovel ever will.
Where does the Snow Joe 324E sit in the wider range? Somewhere specific, which is the point of listing it separately. The Snow Joe 324E is not interchangeable with the neighbouring options, and the specification above is why.
A corded shovel, and the case for never thinking about batteries
The Snow Joe 324E runs on mains power through an extension lead. In a market that has spent a decade moving to lithium, that sounds like a step backwards, and for some households it is exactly the right answer. A corded tool has no battery to flatten, no pack to bring indoors, no capacity that fades at minus twenty and nothing to replace in five years. Plug it in and it works, for as long as you want it to, every time.
At this price it is also the least expensive powered snow tool we stock, which makes it the obvious first step for anyone who has been clearing a front path by hand and has decided not to do that again.
What the 10 amp motor actually delivers
It moves up to 300 pounds of snow a minute and throws it up to 20 feet, clearing a path 11 inches wide and 6 inches deep in a pass. Those are honest figures for a light duty tool. It is quick on a porch, a set of steps, a deck or a front path, and it will keep going long after a cordless shovel has stopped, because runtime is limited only by how long you want to stand outside.
Snow Joe make a sensible point about deeper falls: if more than 6 inches has come down, take the top layer first and work down in stages rather than trying to drive the auger through the lot. That technique works on every shovel in this class and it is the difference between a tool that copes and a tool that stalls.
Full specification
- 10 amp electric motor, mains powered
- 11 inch clearing width, 6 inch clearing depth
- Moves up to 300 pounds of snow per minute
- Two blade paddle auger, throws up to 20 feet
- 2W LED light for clearing after dark
- Patented back saving handle, adjustable
- Weighs 13.6 pounds
- ETL approved, 2 year warranty
The cord is the compromise, so be honest about it
You need an outdoor rated extension lead of the right gauge, and you need to manage it while you work, which means keeping it behind you and out of the auger. On a porch and a front path that is trivial. On a long driveway it is genuinely annoying, and it is the reason we would point you at our cordless range if the driveway is the job. Within about fifty feet of an outdoor socket, the cord costs you very little and saves you the entire battery question.
Choosing the extension lead properly
This is the one purchase that decides whether a corded tool feels good or feels cheap, and most people get it wrong. Use an outdoor rated lead, and pay attention to gauge rather than just length. A thin lead on a 10 amp motor drops voltage over distance, the tool runs below its rated power, and you conclude the machine is weak when the real problem is the cable. A heavier gauge lead costs a little more once and makes the tool perform as designed for its whole life.
Work with the lead draped over your shoulder and trailing behind you, and clear away from the socket rather than towards it. Two minutes of habit keeps the cable out of the auger permanently.
Why a corded tool suits some households perfectly
Consider who this genuinely fits. A townhouse or condo with a small front path and steps. An older owner who does not want to manage charging. A second property that stands empty for weeks, where a lithium pack would be sitting flat and slowly dying. A garage that already has a socket by the door. In all of those, a corded shovel is not a compromise at all, it is simply the correct tool, and it costs a fraction of the cordless equivalent.
Running costs, which are close to nothing
A 10 amp motor used for twenty minutes at a time costs pennies to run, and unlike a gas machine there is no fuel to buy, no oil to change, no spark plug, no filter and no annual service. Over a ten year life the difference against a petrol shovel of similar capability runs into hundreds of dollars before you count the time saved not maintaining it.
There is no battery to replace either, which is the hidden cost people forget when comparing corded against cordless. A lithium pack is a consumable with a finite life measured in charge cycles and years. A mains cable is not. For a tool that might be used fifteen times a winter for a decade, that distinction is worth real money, and it is the strongest argument for corded equipment in a market that has largely stopped making it.
Ordering the Snow Joe 324E in autumn rather than mid storm is the single biggest factor in how quickly it reaches you.
Keep the paperwork that comes with the Snow Joe 324E. Warranty claims go faster when the purchase date is to hand.
What customers ask
What are the symptoms that this needs replacing?
a starter that clicks without turning; green or white powder at a connector face; a fuse that blows again shortly after replacement. Any one of those is worth acting on before the next storm.
Can I fit it myself?
In most cases yes. Route wiring away from hot and moving parts, and replace any clips you removed. Work with the plug lead pulled on a petrol machine and the pack out on a cordless one.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
How long should it last?
Salt spray from a road is the main enemy.
Will you check the fitment for me?
Yes. Send the machine model, the serial number and a photograph of the old part through the contact page and we will confirm in writing before anything ships.





Reviews
There are no reviews yet.