13A Chute Deflector Assembly

13A Chute Deflector Assembly is a discharge chute component, the assembly that aims where the snow leaves the machine. The stock number is C1100720-00. It is listed under Parts and Accessories. Use C1100720-00 when you order and the right item arrives the first time.

Living with a snow blower 13a chute deflector

A chute takes ultraviolet in summer and impact in winter, which is a hard combination for plastic. The chute decides where the snow goes and, in wet conditions, whether it goes anywhere at all.

It is listed under Parts and Accessories. The stock number is C1100720-00. The figure is $49.00, quoted the way every price on this site is quoted, in Canadian dollars.

The numbers

At $49.00 Canadian, this sits where you would expect for the class. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

How to change it

Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Look for hairline cracks around the mounting points on the old part, because that is where the next one will fail too. A side by side check catches the small dimensional differences that photographs never show.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Signs it has reached the end

There is a short list of symptoms here, and most owners recognise at least one of them.

• cracks around the rotation collar after a cold snap
• a deflector that drops under its own weight
• throw distance shorter than it used to be with no change in engine note
• grinding or resistance when rotating the chute
• snow packing at the base of the chute during wet falls

Kept out of ultraviolet over summer, a plastic chute lasts many years. There is no price advantage in waiting and there is a real availability cost.

Identifying the correct component

If you are cross referencing an old component, compare the stamping against C1100720-00 before ordering. The same machine model frequently ships with different components across production years.

Clean the rotation collar and grease it lightly. A clean collar turns with one hand. Fit the fasteners loosely, square the assembly, then tighten in sequence.

Where to find the stamped number on each part is covered in the snow blower repair guide. A photograph settles in one message what a written description takes four exchanges to narrow down.

Buying, shipping and returns

The figure is $49.00, quoted the way every price on this site is quoted, in Canadian dollars. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.

The return window and the freight rules are on returns and refunds. the warranty policy explains what the manufacturer covers and what counts as a consumable.

Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower 13a chute deflector in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Regional notes

What a machine meets in the northern territories is extreme cold that changes how every material behaves, which is a different problem from the national average. Late summer through October is when choice is widest across the whole catalogue.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Reading the listing

The distinguishing terms here are 13a, chute, deflector, assembly. Left and right are not interchangeable even when the castings appear symmetrical.

This line is C1100720-00. Use those figures rather than a description and the fitment is settled.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Have a look at the seals at every shaft exit too. Now is the moment to inspect the covers and guards for cracks. Add the impeller tip clearance to the same inspection.

All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

What to keep on the shelf

Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.

All of it sits on snow blower parts and ships Canada wide from stock held here. The parts everybody wants in February are the parts that are slowest to arrive in February. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

Two practical notes on choosing a snow blower 13a chute deflector. First, match it to the surface before the snowfall, because surface is the constraint that cannot be worked around. Second, a snow blower 13a chute deflector is only as useful as the wear parts you can get for it in February, which is why the stock numbers on this site matter more than the badge.

If you have owned a snow blower 13a chute deflector before, you already know the failure points. If you have not, the short version is that a snow blower 13a chute deflector fails at its consumables and almost never at its castings.

Frequently asked