Snow Blower Parts –21” Shave Plate, Stock #303070741

Snow Blower Parts –21” Shave Plate, Stock #303070741 is a cover, guard, plate or bracket, a structural or protective component of the machine. It is listed under Parts and Accessories. The stock number is 303070741. Use 303070741 when you order and the right item arrives the first time.

What this snow blower -21 shave plate is for

Structural panels also stiffen the frame more than their appearance suggests. Brackets hold components square. Once one is bent, the part it carries starts wearing unevenly.

The stock number is 303070741. It is listed under Parts and Accessories. The listed price is $20.91 CAD and that is the figure you pay, because the stock is already in the country.

The numbers

The figure is $20.91, quoted the way every price on this site is quoted, in Canadian dollars. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Delivery, returns and warranty

The listed price is $20.91 CAD and that is the figure you pay, because the stock is already in the country. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.

What can go back, in what condition and at whose cost is on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower -21 shave plate in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Fitting notes

A pulled plug lead is the difference between a repair and an incident report. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Do not overtighten into plastic. It feels secure and then cracks in the first cold snap. Compare both parts side by side first, particularly length and hole spacing.

The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.

Canadian winters and this part

What a machine meets in the Ontario and Quebec corridor is moderate depth with the plow ridge as the deciding factor, which is a different problem from the national average. Late summer through October is when choice is widest across the whole catalogue.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Before you order

If you are cross referencing an old component, compare the stamping against 303070741 before ordering. Component changes rarely make it into the marketing, only into the parts diagram.

Check the frame threads before fitting, because a previous repair may have chased them out of shape. Offer the part up dry first and confirm every hole lines up before committing.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

Signs it has reached the end

If the machine is doing any of the following, this is the component to examine first.

• a missing cover left off after an earlier repair
• rattling that changes when the panel is pressed
• a cracked panel letting water into the controls
• a bracket no longer holding its component square
• grit collecting where a guard should be

Ultraviolet over summer ages plastic panels more than winter does. There is no price advantage in waiting and there is a real availability cost.

Reading the listing

The distinguishing terms here are shave, plate. Left and right are not interchangeable even when the castings appear symmetrical.

This line is 303070741. Quote it exactly and the right item arrives first time.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Have a look at the fasteners you have just disturbed too. Now is the moment to inspect the seals at every shaft exit. Add the linkage rods and their clips to the same inspection.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

The autumn order

Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.

All of it sits on snow blower parts and ships Canada wide from stock held here. The parts everybody wants in February are the parts that are slowest to arrive in February. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

Before you commit to a snow blower -21 shave plate, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a snow blower -21 shave plate ever will.

Where does a snow blower -21 shave plate sit in the wider range? Somewhere specific, which is the point of listing it separately. A snow blower -21 shave plate is not interchangeable with the neighbouring options, and the specification above is why.

Common questions