Snow Blower Parts, 22″ Shave Plate (186C Red), Stock #303070933

Snow Blower Parts, 22″ Shave Plate (186C Red), Stock #303070933 is a cover, guard, plate or bracket, a structural or protective component of the machine. The cut is 22 inches wide. The stock number is 303070933. This listing is the red finish. It is listed under Parts and Accessories. The identifier that matters here is 303070933. Machine names change between production years and the number does not.

Where a snow blower 22 shave plate fits

These parts take weather rather than load, and cold embrittlement is what finishes them. Brackets hold components square. Once one is bent, the part it carries starts wearing unevenly.

This listing is the red finish. The stock number is 303070933. It is listed under Parts and Accessories. The cut is 22 inches wide. At $6.97 Canadian, this sits where you would expect for the class.

Specification

The figure is $6.97, quoted the way every price on this site is quoted, in Canadian dollars. October is the quiet month for this. February is not, and freight times show it.

Identifying the correct component

Two components can look identical on a bench and take different fitments, so the 303070933 reference is the safe way to buy. Component changes rarely make it into the marketing, only into the parts diagram.

Renew any foam or rubber isolators at the same time. Offer the part up dry first and confirm every hole lines up before committing.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. We would far rather answer a question than process a return, so ask before you order if there is any doubt.

Symptoms worth acting on

Components in this family announce themselves fairly consistently. Any of the following is worth acting on before the next storm.

• a missing cover left off after an earlier repair
• rattling that changes when the panel is pressed
• a cracked panel letting water into the controls
• a bracket no longer holding its component square
• grit collecting where a guard should be

Steel brackets outlast the machine if kept painted. A spare bought before the season is a spare, and a spare bought during one is an emergency.

Delivery, returns and warranty

At $6.97 Canadian, this sits where you would expect for the class. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

Our terms on returns are plainer than most and they are on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower 22 shave plate in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Regional notes

If you are clearing in the prairies, the local pattern is dry snow that drifts back across the drive behind you. The parts everybody wants in February are the parts that are slowest to arrive in February.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

How to change it

A pulled plug lead is the difference between a repair and an incident report. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.

Do not overtighten into plastic. It feels secure and then cracks in the first cold snap. A side by side check catches the small dimensional differences that photographs never show.

The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.

Reading the listing

Note the descriptors: shave, plate, 186c, red. They are not decorative. Where a name carries a size, that size is exact rather than nominal.

This line is 303070933. The 22 inch figure is the clearing width rather than the overall width of the machine. The red finish is cosmetic and does not change fitment. Quote it exactly and the right item arrives first time.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Add the fasteners you have just disturbed to the same inspection. It is worth a minute on the seals at every shaft exit. Have a look at the linkage rods and their clips too.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Planning ahead for February

Anyone who has stood in a storm with a broken machine buys spares the following autumn. Everyone else learns the same way. The four to buy are the belt, the shear pins, the paddles and the scraper bar. Nothing else fails often enough to stock.

Those parts live on snow blower parts, and the maintenance checklist says when to check each of them. Late summer through October is when choice is widest across the whole catalogue. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.

Before you commit to a snow blower 22 shave plate, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a snow blower 22 shave plate ever will.

Where does a snow blower 22 shave plate sit in the wider range? Somewhere specific, which is the point of listing it separately. A snow blower 22 shave plate is not interchangeable with the neighbouring options, and the specification above is why.

What customers ask