This listing is a snow blower 7 wheel assembly, and everything below is written about that specific configuration.
7″ Wheel Assembly is a wheel, tyre or drive component, part of what puts the machine forward through the snow. It is listed under Parts and Accessories. The cut is 7 inches wide. The stock number is R0200165-00. Everything on this page is written against stock number R0200165-00 rather than against the category in general.
On this page
Where a snow blower 7 wheel assembly fits
A machine that spins on a slope is not underpowered, it is under gripped. Friction drive systems are simple, cheap to repair and completely dependent on one rubber ring.
It is listed under Parts and Accessories. The stock number is R0200165-00. The cut is 7 inches wide. The listed price is $16.99 CAD and that is the figure you pay, because the stock is already in the country.
Specification
| Detail | Value |
|---|---|
| Stock number | R0200165-00 |
| Width | 7 in |
| Category | Parts and Accessories |
| Price | $16.99 CAD |
| Ships | Canada wide |
The listed price is $16.99 CAD and that is the figure you pay, because the stock is already in the country. The parts everybody wants in February are the parts that are slowest to arrive in February.
Delivery, returns and warranty
The figure is $16.99, quoted the way every price on this site is quoted, in Canadian dollars. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.
returns and refunds sets out the window and who pays freight in which circumstances. the warranty policy explains what the manufacturer covers and what counts as a consumable.
Questions go through the contact page and are answered by a person, not a script. Consumer rights when buying a snow blower 7 wheel assembly in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Before you order
Order this one by stock number R0200165-00 rather than by the name of the machine it came off. Model names persist for years while the components underneath them do not.
Check the drive plate for scoring while the wheel is off. A glazed friction ring is a common and cheap fault that looks like a failing transmission.
the snow blower repair guide works through the common faults in order of likelihood, which usually shortens the diagnosis. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.
Regional notes
What a machine meets in the lake effect belts is depth repeatedly, sometimes twice in a day, which is a different problem from the national average. October is the quiet month for this. February is not, and freight times show it.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
How to change it
A pulled plug lead is the difference between a repair and an incident report. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.
Fit tyres as a pair where possible so the machine tracks straight. Keep the old part until the machine has run properly under load.
Clear blockages with the tool, never with a glove, and never with the engine merely idling. The same rule applies whenever the auger housing is open.
When this is the fault
If the machine is doing any of the following, this is the component to examine first.
- uneven tread wear side to side
- play at the axle that was not there last season
- wheelspin on a slope or on packed ice
- the machine pulling steadily to one side
- a friction drive that slips once warm
Chains extend tyre life as well as traction. Buying in autumn costs the same as buying in January and arrives considerably faster.
Reading the listing
The words that matter in this listing are wheel, assembly. Each one narrows the fitment. The qualifier at the end of the name is usually the one that decides the fit.
This line is R0200165-00. The 7 inch figure is the clearing width rather than the overall width of the machine. Get that right and the rest of the order takes care of itself.
What else to check
Most of what fails next is already visible while you have access. Give the bearings for play and roughness a proper look while access is easy. The same visit should cover the shift and steering linkage. Do not close the assembly without checking the fasteners you have just disturbed.
None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What to keep on the shelf
The households that never lose a weekend to a breakdown are not lucky. They have a small box on a shelf with four or five cheap items in it. On a cordless machine the list is shorter: a spare pack and a paddle set is genuinely all most owners need.
Those parts live on snow blower parts, and the maintenance checklist says when to check each of them. Stock moves quickly once the snow starts, which is the only real argument for ordering early. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.
The common mistake with a snow blower 7 wheel assembly is buying on a single headline number. A snow blower 7 wheel assembly should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.
Two things people ask about a snow blower 7 wheel assembly that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower 7 wheel assembly bought here, both are covered above.
Common questions
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Does fitting this affect my warranty?
Fitting a correct replacement part does not void a manufacturer warranty. Consumables were never covered in the first place.
What are the symptoms that this needs replacing?
uneven tread wear side to side; play at the axle that was not there last season; wheelspin on a slope or on packed ice. Any one of those is worth acting on before the next storm.
How do I know this fits my machine?
Order by stock number R0200165-00. The same model frequently ships with different components across production years, so the stamped number is the only reliable identifier.
Will you check the fitment for me?
Yes. Send the machine model, the serial number and a photograph of the old part through the contact page and we will confirm in writing before anything ships.
Can I fit it myself?
In most cases yes. Check the drive plate for scoring while the wheel is off. Work with the plug lead pulled on a petrol machine and the pack out on a cordless one.
Reviews
There are no reviews yet.