Snow Blower Parts, Anti, knockout, Stock #303160987A

Snow Blower Parts, Anti, knockout, Stock #303160987A is a replacement component for a snow blower or outdoor power machine. The stock number is 303160987A. It is listed under Parts and Accessories. We list this as 303160987A precisely because near identical parts are not interchangeable.

Where a snow blower anti fits

Nothing here is exotic. What matters is that it is the right one for the machine in front of you. This is an ordinary replacement part, and ordinary replacement parts are what keep a machine out of a shop queue.

It is listed under Parts and Accessories. The stock number is 303160987A. The listed price is $5.58 CAD and that is the figure you pay, because the stock is already in the country.

Key figures

The listed price is $5.58 CAD and that is the figure you pay, because the stock is already in the country. Late summer through October is when choice is widest across the whole catalogue.

Identifying the correct component

Stock number 303160987A is what to quote if you email us to check a fit, because it removes the guesswork entirely. Model names persist for years while the components underneath them do not.

Check the mating surfaces and fasteners while the assembly is open. Photograph the arrangement before you strip it.

Where to find the stamped number on each part is covered in the snow blower repair guide. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.

Signs it has reached the end

If the machine is doing any of the following, this is the component to examine first.

• play or movement where the assembly should be solid
• uneven wear across a surface that should wear evenly
• a noise that follows machine speed rather than engine speed
• a repair that did not hold through the season
• a component that is visibly worn, cracked or distorted

Replaced once, correctly, this rarely comes up again. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Fitting it

Isolate the machine before you start. Nothing on this job needs the engine turning. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Work clean. Grit introduced during a repair is a failure two winters later. A side by side check catches the small dimensional differences that photographs never show.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Canadian winters and this part

Canada is not one snow market. In Atlantic Canada the pattern is depth, wind and salt air arriving together. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Buying, shipping and returns

The figure is $5.58, quoted the way every price on this site is quoted, in Canadian dollars. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

Our terms on returns are plainer than most and they are on returns and refunds. What is covered and what is treated as wear is set out on the warranty policy.

Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower anti in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Reading the listing

This is catalogued as anti, knockout, and every one of those terms is doing work. Position words such as upper, lower, left and right are the ones people skip, and they are the ones that cause returns.

This line is 303160987A. Get that right and the rest of the order takes care of itself.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Do not close the assembly without checking the fasteners you have just disturbed. Look at the bearings for play and roughness before you close it up. Give the seals at every shaft exit a proper look while access is easy.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Planning ahead for February

There is a short list of components that fail during a storm, and every one of them is inexpensive if bought before the storm. Keep the stock numbers written inside the machine cover and reordering takes under a minute.

All of it sits on snow blower parts and ships Canada wide from stock held here. October is the quiet month for this. February is not, and freight times show it. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.

People shopping for a snow blower anti usually start with price and end with availability. The sensible order is the reverse. Establish that a snow blower anti of this type suits your surface and your typical snowfall, then compare what the market charges for it.

The market for a snow blower anti in Canada is thinner than it should be, which is part of why we stock this properly. A snow blower anti that nobody carries parts for is a machine with an expiry date.

Common questions