Snow Blower Parts- Chute Deflector Cable-HB7108A,DB7108B

Snow Blower Parts- Chute Deflector Cable-HB7108A,DB7108B is a control cable, the sheathed steel wire that carries a lever movement at the handle down to the clutch it operates. It is listed under Parts and Accessories. The model reference printed on the unit is HB7108A. The stock number is 303200151. Stock number 303200151 is what to quote if you email us to check a fit, because it removes the guesswork entirely.

The case for this snow blower chute deflector

The sheath keeps grit out and the inner wire does the work. When either fails the symptom is the same, vague control. Nothing about a cable is dramatic until the day the auger will not disengage.

The model reference printed on the unit is HB7108A. It is listed under Parts and Accessories. The stock number is 303200151. It is priced at $8.78 in Canadian dollars, with no conversion applied at the checkout.

Technical detail

You are looking at $8.78 CAD delivered into the Canadian market. Buying in autumn costs the same as buying in January and arrives considerably faster.

Getting it to you

You are looking at $8.78 CAD delivered into the Canadian market. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

What can go back, in what condition and at whose cost is on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower chute deflector in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

The replacement procedure

Take the battery out first on a cordless unit, and pull the plug cap on an engine. Note where the longer bolts came from. They are rarely interchangeable with the short ones.

Set it with the machine on level ground and the controls at rest. Check the replacement against what came off before you commit to the build.

A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.

How this behaves in a real winter

Conditions in the Ontario and Quebec corridor mean moderate depth with the plow ridge as the deciding factor, and that changes what matters here. Buying in autumn costs the same as buying in January and arrives considerably faster.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Making sure it is the right part

Use 303200151 when you order and the right item arrives the first time. A part that fitted a machine built in one year may not fit the same model built in the next.

Route the new cable the way the old one ran. A tight radius doubles the effort at the lever and halves the life. There is an adjuster barrel at the handle end on most machines. Take up slack until a small amount of free play remains.

If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. We would far rather answer a question than process a return, so ask before you order if there is any doubt.

How to tell it needs changing

These are the signs that come up again and again on this part.

• an adjuster barrel already wound to its limit
• a lever that must be squeezed fully before anything engages
• the auger or drive still turning after the lever is released
• engagement that feels vague compared with the first season
• visible fraying where the inner wire leaves the sheath

Five seasons and up is normal on a machine kept dry. The parts everybody wants in February are the parts that are slowest to arrive in February.

Reading the listing

What separates this from a similar looking line is chute, deflector, cable, hb7108a, db7108b. Assembly descriptors matter: an assembly includes hardware that a bare component does not.

This line is 303200151. The printed model reference is HB7108A. Anything less precise than that is where wrong parts come from.

What else to check

The second strip down is the expensive one, so look at the neighbours now. It is worth a minute on the return springs at each lever. Add the belts and their guides to the same inspection. Now is the moment to inspect the shift and steering linkage.

snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Keeping a spares kit

The economics here are lopsided. A few dollars of spares against a week of an uncleared driveway. Start with a drive belt and a pack of shear pins. Add paddles and a scraper bar if the machine is a single stage unit.

Order the whole kit in one go from snow blower parts and pay one lot of freight rather than four. There is no price advantage in waiting and there is a real availability cost. Keep it dry between seasons and most of the failures on this page never happen.

The common mistake with a snow blower chute deflector is buying on a single headline number. A snow blower chute deflector should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.

Two things people ask about a snow blower chute deflector that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower chute deflector bought here, both are covered above.

Common queries