Snow Blower Parts, Flat Washer M6, Stock #303042001

Snow Blower Parts, Flat Washer M6, Stock #303042001 is a fastener, the specific nut, bolt, screw, washer or clip that holds one part of the machine to another. It is listed under Parts and Accessories. The stock number is 303042001. The thread is M6, and the next size either way will not do. Two components can look identical on a bench and take different fitments, so the 303042001 reference is the safe way to buy.

This snow blower flat washer m6 in practice

The cheapest way to ruin an aluminium casting is to run a near enough fastener into it and lean on the spanner. Every joint on the machine has a fastener chosen for a reason: a shoulder that locates, a flange that spreads load, a nylon insert that resists vibration.

The stock number is 303042001. The thread is M6, and the next size either way will not do. It is listed under Parts and Accessories. $8.36 CAD covers it, with no duty arriving at the door afterwards.

Specification and price

You are looking at $8.36 CAD delivered into the Canadian market. There is no price advantage in waiting and there is a real availability cost.

Fitment and identification

Everything on this page is written against stock number 303042001 rather than against the category in general. Production year matters more than model name when ordering.

Torque to specification rather than to feel. Aluminium threads give no warning before they let go. Use a thread locker only where the manual asks for it, and never on a nylon insert nut.

the snow blower repair guide shows where the manufacturer stock number is stamped on each common component. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

How this behaves in a real winter

The mistake we watch repeatedly is buying for the exceptional storm rather than the ordinary one. The storm of the decade is two extra passes. Paying for it every winter in weight, storage space and purchase price is poor value.

Look up your own station on the ECCC climate records and size against the typical event.

Getting it to you

$8.36 CAD covers it, with no duty arriving at the door afterwards. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.

Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. Belts, shear pins, paddles, scraper bars and skid shoes are excluded everywhere. the warranty policy has the detail.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower flat washer m6 in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

How to tell it needs changing

These are the signs that come up again and again on this part.

• a bolt that bottoms out before the joint is clamped
• a joint that will not stay tight through a season
• a rounded or stripped head left by an earlier repair
• vibration that appeared after work was done nearby
• visible corrosion at the thread or under the head

A fastener that has been rounded once should not go back in. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

The replacement procedure

Work with the plug lead pulled on a petrol machine and the pack out on a cordless one. A magnetic tray and a bit of discipline turns this into a twenty minute job.

Check whether the original had a nylon insert, a flange or a shoulder before substituting anything. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.

Impeller injuries remain the most common serious accident with this equipment, and they happen to experienced operators who took one shortcut. The same rule applies whenever the auger housing is open.

Reading the listing

Read the description literally: flat, washer. Those terms are how this differs from the neighbouring line. A part described as upper is not the lower equivalent, however similar the two look on a bench.

This line is 303042001. Thread size M6 is exact and the adjacent sizes will not thread correctly. Anything less precise than that is where wrong parts come from.

What else to check

While the machine is apart, there are a few obvious things worth checking. Look at the covers and guards for cracks before you close it up. Do not close the assembly without checking the seals at every shaft exit. The same visit should cover the bearings for play and roughness.

snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Building a small spares kit

A shed with the right three parts in it turns a broken machine into a twenty minute job. Without them it becomes a shop queue in the week everybody else is also in a shop queue.

Order early against the stock numbers on the parts catalogue. Freight across Canada slows noticeably once the first real storms land.

Questions and answers

How this one differs from the line beside it

This particular line is stock number 303042001, which is not the neighbouring entry. Order against 303042001 rather than against a description. That number is what our catalogue and the manufacturer parts diagram agree on, and it survives the model name changes that happen between production years.

Buyers who return one of these almost always chose on appearance. The specification above is the part worth reading twice. Quoting 303042001 at the point of order removes every ambiguity between this line and its neighbours.

Which of these you actually want

Two components can sit next to each other in a catalogue, share a photograph and fit nothing in common. This one is 303042001. Position words, thread sizes and assembly descriptors are the whole difference and they are the part people skip.

If you are working from a parts diagram, match the callout number to the stock number rather than to the picture. Diagrams are drawn once and reused across several production years, so the illustration is often a generation behind the component actually fitted.

Send us the model and serial from the machine plate if you are not certain which variant you are looking at, and we will confirm it before anything ships.

Snow blower flat washer m6, in short

If you are searching for a snow blower flat washer m6 and want the answer without the reading, this listing is it. A snow blower flat washer m6 is judged on fit and on supply rather than on badge, and both are covered above. Order the snow blower flat washer m6 you actually need rather than the one that photographs best.