Snow Blower Parts, Hex Washer Screw (M8X20), Stock #303020106

Snow Blower Parts, Hex Washer Screw (M8X20), Stock #303020106 is a fastener, the specific nut, bolt, screw, washer or clip that holds one part of the machine to another. It is listed under Parts and Accessories. The thread is M8, and the next size either way will not do. The stock number is 303020106. Use 303020106 when you order and the right item arrives the first time.

What this snow blower hex washer screw is for

A snow blower shakes, freezes and thaws all winter. The hardware holding it together is doing more work than it looks like. Hardware is where amateur repairs go wrong. The part costs pennies and the thread it strips costs a housing.

The thread is M8, and the next size either way will not do. The stock number is 303020106. It is listed under Parts and Accessories. The listed price is $3.21 CAD and that is the figure you pay, because the stock is already in the country.

Key figures

The listed price is $3.21 CAD and that is the figure you pay, because the stock is already in the country. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Symptoms worth acting on

Components in this family announce themselves fairly consistently. Any of the following is worth acting on before the next storm.

• a joint that will not stay tight through a season
• a rounded or stripped head left by an earlier repair
• vibration that appeared after work was done nearby
• visible corrosion at the thread or under the head
• a fastener that turns without tightening

Indefinite, until somebody puts the wrong tool on the head. There is no price advantage in waiting and there is a real availability cost.

Getting the fitment right

If you are cross referencing an old component, compare the stamping against 303020106 before ordering. The same machine model frequently ships with different components across production years.

Replace plated hardware rather than reusing it once the plating is scratched, because that is where corrosion starts. Check whether the original had a nylon insert, a flange or a shoulder before substituting anything.

the snow blower repair guide works through the common faults in order of likelihood, which usually shortens the diagnosis. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

Buying for a Canadian winter

If you are clearing in the lake effect belts, the local pattern is depth repeatedly, sometimes twice in a day. Late summer through October is when choice is widest across the whole catalogue.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Delivery, returns and warranty

The listed price is $3.21 CAD and that is the figure you pay, because the stock is already in the country. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

The return window and the freight rules are on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower hex washer screw in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Fitting it

A pulled plug lead is the difference between a repair and an incident report. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.

Use a thread locker only where the manual asks for it, and never on a nylon insert nut. Keep the old part until the machine has run properly under load.

Clear blockages with the tool, never with a glove, and never with the engine merely idling. The same rule applies whenever the auger housing is open.

Reading the listing

The distinguishing terms here are hex, washer, screw, m8x20. Left and right are not interchangeable even when the castings appear symmetrical.

This line is 303020106. Thread size M8 is exact and the adjacent sizes will not thread correctly. Quote it exactly and the right item arrives first time.

What else to check

Since the assembly is open, spend five minutes on what sits next to it. Have a look at the covers and guards for cracks too. Now is the moment to inspect the seals at every shaft exit. Add the bearings for play and roughness to the same inspection.

All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Planning ahead for February

Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.

Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. The parts everybody wants in February are the parts that are slowest to arrive in February. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

People shopping for a snow blower hex washer screw usually start with price and end with availability. The sensible order is the reverse. Establish that a snow blower hex washer screw of this type suits your surface and your typical snowfall, then compare what the market charges for it.

The market for a snow blower hex washer screw in Canada is thinner than it should be, which is part of why we stock this properly. A snow blower hex washer screw that nobody carries parts for is a machine with an expiry date.

Frequently asked