Snow Blower Parts –Hex Washer Screw M6 ×16, Stock #303020084

Snow Blower Parts –Hex Washer Screw M6 ×16, Stock #303020084 is a fastener, the specific nut, bolt, screw, washer or clip that holds one part of the machine to another. The thread is M6, and the next size either way will not do. The stock number is 303020084. It is listed under Parts and Accessories. We list this as 303020084 precisely because near identical parts are not interchangeable.

Where a snow blower -hex washer screw m6 fits

Every joint on the machine has a fastener chosen for a reason: a shoulder that locates, a flange that spreads load, a nylon insert that resists vibration. The cheapest way to ruin an aluminium casting is to run a near enough fastener into it and lean on the spanner.

The stock number is 303020084. The thread is M6, and the next size either way will not do. It is listed under Parts and Accessories. The figure is $8.35, quoted the way every price on this site is quoted, in Canadian dollars.

Specification

The listed price is $8.35 CAD and that is the figure you pay, because the stock is already in the country. Late summer through October is when choice is widest across the whole catalogue.

Before you order

Stock number 303020084 is what to quote if you email us to check a fit, because it removes the guesswork entirely. Model names persist for years while the components underneath them do not.

Match pitch and length exactly. A bolt ten millimetres too long bottoms out and feels tight while the joint is still loose. Check whether the original had a nylon insert, a flange or a shoulder before substituting anything.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. A photograph settles in one message what a written description takes four exchanges to narrow down.

Fitting notes

Isolate the machine before you start. Nothing on this job needs the engine turning. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Use a thread locker only where the manual asks for it, and never on a nylon insert nut. A side by side check catches the small dimensional differences that photographs never show.

Clear blockages with the tool, never with a glove, and never with the engine merely idling. The same rule applies whenever the auger housing is open.

Buying for a Canadian winter

What a machine meets in Atlantic Canada is depth, wind and salt air arriving together, which is a different problem from the national average. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Buying, shipping and returns

The figure is $8.35, quoted the way every price on this site is quoted, in Canadian dollars. Parcel delivery on small components, free freight once the order passes $999. shipping and delivery has the detail.

Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. Consumables are never covered on any badge, and the warranty policy lists them.

We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower -hex washer screw m6 in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Signs it has reached the end

If the machine is doing any of the following, this is the component to examine first.

• vibration that appeared after work was done nearby
• visible corrosion at the thread or under the head
• a fastener that turns without tightening
• a washer flattened out of shape
• a nylon insert that no longer grips

They fail from corrosion and from being reused too often, not from age. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Reading the listing

This is catalogued as hex, washer, screw, and every one of those terms is doing work. Position words such as upper, lower, left and right are the ones people skip, and they are the ones that cause returns.

This line is 303020084. Thread size M6 is exact and the adjacent sizes will not thread correctly. Use those figures rather than a description and the fitment is settled.

What else to check

Most of what fails next is already visible while you have access. Do not close the assembly without checking the covers and guards for cracks. Look at the seals at every shaft exit before you close it up. Give the bearings for play and roughness a proper look while access is easy.

We hold all of those on snow blower parts, listed by the number stamped on the part. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

The autumn order

There is a short list of components that fail during a storm, and every one of them is inexpensive if bought before the storm. Keep the stock numbers written inside the machine cover and reordering takes under a minute.

Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. October is the quiet month for this. February is not, and freight times show it. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

The common mistake with a snow blower -hex washer screw m6 is buying on a single headline number. A snow blower -hex washer screw m6 should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.

Two things people ask about a snow blower -hex washer screw m6 that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower -hex washer screw m6 bought here, both are covered above.

Common questions