Snow Blower Parts –Hex Washer Screw (M6X35), Stock #303020442

Snow Blower Parts –Hex Washer Screw (M6X35), Stock #303020442 is a fastener, the specific nut, bolt, screw, washer or clip that holds one part of the machine to another. The stock number is 303020442. It is listed under Parts and Accessories. The thread is M6, and the next size either way will not do. We list this as 303020442 precisely because near identical parts are not interchangeable.

Choosing a snow blower -hex washer screw for a Canadian driveway

Vibration is the enemy here. What holds through a summer of mowing does not necessarily hold through a February of clearing ridge ice. Hardware is where amateur repairs go wrong. The part costs pennies and the thread it strips costs a housing.

The thread is M6, and the next size either way will not do. The stock number is 303020442. It is listed under Parts and Accessories. The listed price is $8.35 CAD and that is the figure you pay, because the stock is already in the country.

The numbers

The figure is $8.35, quoted the way every price on this site is quoted, in Canadian dollars. Late summer through October is when choice is widest across the whole catalogue.

Canadian winters and this part

If you are clearing in the lake effect belts, the local pattern is depth repeatedly, sometimes twice in a day. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Getting the fitment right

Stock number 303020442 is what to quote if you email us to check a fit, because it removes the guesswork entirely. Component changes rarely make it into the marketing, only into the parts diagram.

Replace plated hardware rather than reusing it once the plating is scratched, because that is where corrosion starts. Count the threads showing on the original and match them on the replacement.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. Send us the machine model, the serial number and a photograph of the old component and we will confirm the fit in writing before anything ships.

Signs it has reached the end

There is a short list of symptoms here, and most owners recognise at least one of them.

• vibration that appeared after work was done nearby
• visible corrosion at the thread or under the head
• a fastener that turns without tightening
• a washer flattened out of shape
• a nylon insert that no longer grips

Indefinite, until somebody puts the wrong tool on the head. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Fitting notes

A pulled plug lead is the difference between a repair and an incident report. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Match pitch and length exactly. A bolt ten millimetres too long bottoms out and feels tight while the joint is still loose. Keep the old part until the machine has run properly under load.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Ordering from us

At $8.35 Canadian, this sits where you would expect for the class. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.

Our terms on returns are plainer than most and they are on returns and refunds. What is covered and what is treated as wear is set out on the warranty policy.

The contact page is the fastest route to a straight answer on fitment. Consumer rights when buying a snow blower -hex washer screw in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Reading the listing

This is catalogued as hex, washer, screw, m6x35, and every one of those terms is doing work. Position words such as upper, lower, left and right are the ones people skip, and they are the ones that cause returns.

This line is 303020442. Thread size M6 is exact and the adjacent sizes will not thread correctly. Quote it exactly and the right item arrives first time.

What else to check

Since the assembly is open, spend five minutes on what sits next to it. Do not close the assembly without checking the covers and guards for cracks. Look at the seals at every shaft exit before you close it up. Give the bearings for play and roughness a proper look while access is easy.

All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

The autumn order

There is a short list of components that fail during a storm, and every one of them is inexpensive if bought before the storm. Keep the stock numbers written inside the machine cover and reordering takes under a minute.

Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. October is the quiet month for this. February is not, and freight times show it. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.

If you are comparing this snow blower -hex washer screw against something similar elsewhere, compare like for like. Kit prices against bare tool prices, and a snow blower -hex washer screw quoted in Canadian dollars against one that is not, are two of the most common ways buyers mislead themselves.

One more angle on the snow blower -hex washer screw question. Freight and availability across Canada shift sharply once the first storms land, so a snow blower -hex washer screw ordered in October reaches you in days and the same snow blower -hex washer screw ordered in January can take weeks.

Common questions