Consider this the full brief on a snow blower plastic hex flange for a Canadian driveway.
Snow Blower Parts, Plastic Hex Flange Bearing, Stock #203060013 is a bearing or bushing, the component that lets a shaft turn without wearing its housing away. The stock number is 203060013. It is listed under Parts and Accessories. If you are cross referencing an old component, compare the stamping against 203060013 before ordering.
On this page
Choosing a snow blower plastic hex flange for a Canadian driveway
Water sitting in a housing over summer is what ends most bearings on this equipment. This is a component where a small early replacement avoids a large later one.
It is listed under Parts and Accessories. The stock number is 203060013. You are looking at $4.18 CAD delivered into the Canadian market.
Technical detail
| Detail | Value |
|---|---|
| Stock number | 203060013 |
| Category | Parts and Accessories |
| Price | $4.18 CAD |
| Ships | Canada wide |
It is priced at $4.18 in Canadian dollars, with no conversion applied at the checkout. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.
What it fits
The identifier that matters here is 203060013. Machine names change between production years and the number does not. Production year matters more than model name when ordering.
Support the inner race when pressing on, the outer when pressing off. Check the shaft for scoring while it is apart.
If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.
How ordering works
You are looking at $4.18 CAD delivered into the Canadian market. Parcel delivery on small components, free freight once the order passes $999. shipping and delivery has the detail.
The return window and the freight rules are on returns and refunds. Belts, shear pins, paddles, scraper bars and skid shoes are excluded everywhere. the warranty policy has the detail.
We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower plastic hex flange in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Diagnosing it
These are the signs that come up again and again on this part.
- side to side play in a shaft that should turn true
- heat at the housing after a short run
- a shaft that no longer spins freely by hand
- rust staining around the housing
- a belt that keeps failing on one pulley
Water is the enemy, not hours. Late summer through October is when choice is widest across the whole catalogue.
In Canadian conditions
Across the northern territories the defining condition is extreme cold that changes how every material behaves. A spare bought before the season is a spare, and a spare bought during one is an emergency.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
Installing the replacement
Work with the plug lead pulled on a petrol machine and the pack out on a cordless one. A magnetic tray and a bit of discipline turns this into a twenty minute job.
Press rather than hammer where you can, and support the housing. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.
A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.
Reading the listing
Listed as plastic, hex, flange, bearing, which is the level of precision this catalogue works at. Two lines can differ by one word and be entirely different parts.
This line is 203060013. That is the level of detail worth checking twice before you click buy.
What else to check
One more inspection now saves an afternoon later in the winter. The same visit should cover the seals at every shaft exit. Give the linkage rods and their clips a proper look while access is easy. Look at every pulley and idler, spun by hand before you close it up.
Everything above is stocked on snow blower parts by manufacturer stock number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
Building a small spares kit
Keeping spares is the single cheapest thing an owner can do to protect a fifteen year machine. Belts and shear pins first, then skid shoes if you clear gravel, then a spare clearing tool because they get lost.
Find them on snow blower parts by stock number, which removes the guesswork entirely. A spare bought before the season is a spare, and a spare bought during one is an emergency. Damp storage does more damage over one summer than a whole winter of clearing does.
If you are comparing this snow blower plastic hex flange against something similar elsewhere, compare like for like. Kit prices against bare tool prices, and a snow blower plastic hex flange quoted in Canadian dollars against one that is not, are two of the most common ways buyers mislead themselves.
One more angle on the snow blower plastic hex flange question. Freight and availability across Canada shift sharply once the first storms land, so a snow blower plastic hex flange ordered in October reaches you in days and the same snow blower plastic hex flange ordered in January can take weeks.
Questions we are asked about this
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
How long should it last?
Ten years is unremarkable on a machine stored indoors.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
Will you check the fitment for me?
Yes. Send the machine model, the serial number and a photograph of the old part through the contact page and we will confirm in writing before anything ships.
Reviews
There are no reviews yet.