Snow Blower Parts, Plate Left, Stock #303070738

Snow Blower Parts, Plate Left, Stock #303070738 is a cover, guard, plate or bracket, a structural or protective component of the machine. It is listed under Parts and Accessories. The stock number is 303070738. Everything on this page is written against stock number 303070738 rather than against the category in general.

What this snow blower plate left is for

These parts take weather rather than load, and cold embrittlement is what finishes them. Guards and covers are not trim. They keep snow, grit and hands out of parts that are expensive to reach.

The stock number is 303070738. It is listed under Parts and Accessories. The listed price is $13.92 CAD and that is the figure you pay, because the stock is already in the country.

The numbers

At $13.92 Canadian, this sits where you would expect for the class. The parts everybody wants in February are the parts that are slowest to arrive in February.

Signs it has reached the end

There is a short list of symptoms here, and most owners recognise at least one of them.

• grit collecting where a guard should be
• fasteners that will not stay tight because the mounting has distorted
• a missing cover left off after an earlier repair
• rattling that changes when the panel is pressed
• a cracked panel letting water into the controls

Cold makes plastic brittle, so most breakages happen in January rather than July. Buying in autumn costs the same as buying in January and arrives considerably faster.

Canadian winters and this part

What a machine meets in the Ontario and Quebec corridor is moderate depth with the plow ridge as the deciding factor, which is a different problem from the national average. October is the quiet month for this. February is not, and freight times show it.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Fitting notes

Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.

Renew any foam or rubber isolators at the same time. Keep the old part until the machine has run properly under load.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Before you order

Order this one by stock number 303070738 rather than by the name of the machine it came off. Model names persist for years while the components underneath them do not.

Do not overtighten into plastic. It feels secure and then cracks in the first cold snap. Check the frame threads before fitting, because a previous repair may have chased them out of shape.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.

Buying, shipping and returns

The listed price is $13.92 CAD and that is the figure you pay, because the stock is already in the country. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.

returns and refunds sets out the window and who pays freight in which circumstances. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower plate left in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Reading the listing

The words that matter in this listing are plate, left. Each one narrows the fitment. The qualifier at the end of the name is usually the one that decides the fit.

This line is 303070738. Quote it exactly and the right item arrives first time.

What else to check

Since the assembly is open, spend five minutes on what sits next to it. Give the fasteners you have just disturbed a proper look while access is easy. The same visit should cover the seals at every shaft exit. Do not close the assembly without checking the linkage rods and their clips.

All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

What to keep on the shelf

The households that never lose a weekend to a breakdown are not lucky. They have a small box on a shelf with four or five cheap items in it. On a cordless machine the list is shorter: a spare pack and a paddle set is genuinely all most owners need.

All of it sits on snow blower parts and ships Canada wide from stock held here. Stock moves quickly once the snow starts, which is the only real argument for ordering early. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

Before you commit to a snow blower plate left, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a snow blower plate left ever will.

Where does a snow blower plate left sit in the wider range? Somewhere specific, which is the point of listing it separately. A snow blower plate left is not interchangeable with the neighbouring options, and the specification above is why.

Common questions