Snow blower Parts- Skid Shoe Set (Plastic-Red),Stock#203050938

Snow blower Parts- Skid Shoe Set (Plastic-Red),Stock#203050938 is a skid shoe, the adjustable plate on each side of the auger housing that holds the auger clear of the surface. This listing is the red finish. It is listed under Parts and Accessories. The stock number is 203050938. If you are cross referencing an old component, compare the stamping against 203050938 before ordering.

What this snow blower skid shoe set is for

Skid shoes are the reason a two stage machine can work on gravel at all. Setting these correctly is the difference between a clean finish and a driveway full of stone.

The stock number is 203050938. This listing is the red finish. It is listed under Parts and Accessories. You are looking at $18.19 CAD delivered into the Canadian market.

Specification at a glance

It is priced at $18.19 in Canadian dollars, with no conversion applied at the checkout. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

How ordering works

$18.19 CAD covers it, with no duty arriving at the door afterwards. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.

returns and refunds sets out the window and who pays freight in which circumstances. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.

The contact page is the fastest route to a straight answer on fitment. Consumer rights when buying a snow blower skid shoe set in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

When to replace it

The warning signs are not subtle once you know what to look for.

• the scraper bar wearing unevenly side to side
• the housing dragging on one corner
• a visible step worn into the shoe
• the machine cutting deeper on one side
• stone picked up and thrown on a gravel drive

Two to five seasons depending on surface. Late summer through October is when choice is widest across the whole catalogue.

Fitment and identification

The identifier that matters here is 203050938. Machine names change between production years and the number does not. A part that fitted a machine built in one year may not fit the same model built in the next.

Replace them in pairs so the housing sits level. Reversible shoes can be turned once before replacement.

If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. A photograph settles in one message what a written description takes four exchanges to narrow down.

How this behaves in a real winter

Conditions in Atlantic Canada mean depth, wind and salt air arriving together, and that changes what matters here. A spare bought before the season is a spare, and a spare bought during one is an emergency.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Doing the job properly

Remove the source of power before the first fastener comes off, not after. Note where the longer bolts came from. They are rarely interchangeable with the short ones.

Loosen, set the gap with a piece of timber, then tighten evenly. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.

Never clear a blocked chute by hand. The impeller stores energy with the engine off and releases it when the obstruction moves. The same rule applies whenever the auger housing is open.

Reading the listing

Listed as skid, shoe, set, plastic, red, which is the level of precision this catalogue works at. Two lines can differ by one word and be entirely different parts.

This line is 203050938. The red finish is cosmetic and does not change fitment. That is the level of detail worth checking twice before you click buy.

What else to check

The second strip down is the expensive one, so look at the neighbours now. The same visit should cover the scraper bar clearance. Give the auger flights for straightness a proper look while access is easy. Look at the fasteners you have just disturbed before you close it up.

Everything above is stocked on snow blower parts by manufacturer stock number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Building a small spares kit

Keeping spares is the single cheapest thing an owner can do to protect a fifteen year machine. Belts and shear pins first, then skid shoes if you clear gravel, then a spare clearing tool because they get lost.

Order the whole kit in one go from snow blower parts and pay one lot of freight rather than four. A spare bought before the season is a spare, and a spare bought during one is an emergency. Where it sits from April to October matters more than most owners expect.

The common mistake with a snow blower skid shoe set is buying on a single headline number. A snow blower skid shoe set should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.

Two things people ask about a snow blower skid shoe set that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower skid shoe set bought here, both are covered above.

Questions we are asked about this