Here is the honest picture on this snow blower snow joe 20-volt, written for Canadian conditions rather than for a catalogue.
Snow Joe 20-Volt Cordless Snow Shovel Kit | Directional Chute | Brushless Motor | W/ 5.0-Ah Battery + Charger is a discharge chute component, the assembly that aims where the snow leaves the machine. It belongs to the 20 volt platform. It is listed under Parts and Accessories. The stock number is X20-SNOW-5A. Pack capacity is 5.0 amp hours. Stock number X20-SNOW-5A is what to quote if you email us to check a fit, because it removes the guesswork entirely.
On this page
Living with a snow blower snow joe 20-volt
Everything the auger and impeller do arrives here. A restriction at this point undoes the work of both. A chute takes ultraviolet in summer and impact in winter, which is a hard combination for plastic.
Pack capacity is 5.0 amp hours. The stock number is X20-SNOW-5A. It belongs to the 20 volt platform. It is listed under Parts and Accessories. $209.06 CAD covers it, with no duty arriving at the door afterwards.
Specification at a glance
| Detail | Value |
|---|---|
| Stock number | X20-SNOW-5A |
| Brand | Snow Joe |
| Platform | 20 V |
| Pack capacity | 5.0 Ah |
| Category | Parts and Accessories |
| Price | $209.06 CAD |
| Ships | Canada wide |
It is priced at $209.06 in Canadian dollars, with no conversion applied at the checkout. Buying in autumn costs the same as buying in January and arrives considerably faster.
The replacement procedure
Take the battery out first on a cordless unit, and pull the plug cap on an engine. Keep the hardware in sequence as you strip it. Reassembly is where mismatched fasteners quietly appear.
Look for hairline cracks around the mounting points on the old part, because that is where the next one will fail too. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.
A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.
In Canadian conditions
Across the northern territories the defining condition is extreme cold that changes how every material behaves. Buying in autumn costs the same as buying in January and arrives considerably faster.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
Getting it to you
$209.06 CAD covers it, with no duty arriving at the door afterwards. Anything of this size posts normally, and the free freight threshold is $999. shipping and delivery has the detail.
Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. What is covered and what is treated as wear is set out on the warranty policy.
We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower snow joe 20-volt in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
How to tell it needs changing
These are the signs that come up again and again on this part.
- the chute failing to hold the direction it is set to
- cracks around the rotation collar after a cold snap
- a deflector that drops under its own weight
- throw distance shorter than it used to be with no change in engine note
- grinding or resistance when rotating the chute
Steel lasts longer but rusts at the seams if stored damp. The parts everybody wants in February are the parts that are slowest to arrive in February.
Fitment and identification
Use X20-SNOW-5A when you order and the right item arrives the first time. Manufacturers change suppliers mid model, which is why two identical looking machines take different parts.
Clean the rotation collar and grease it lightly. A clean collar turns with one hand. Make sure the seal or gasket at the base sits flat, or wet snow will pack into the gap.
If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. A photograph settles in one message what a written description takes four exchanges to narrow down.
Reading the listing
What separates this from a similar looking line is shovel, directional, chute, brushless, motor, battery, charger. Assembly descriptors matter: an assembly includes hardware that a bare component does not.
This line is X20-SNOW-5A. The 20 volt figure refers to the platform, not to a household supply. The 5.0 amp hour figure is pack capacity, which is what sets runtime. That is the level of detail worth checking twice before you click buy.
What else to check
While the machine is apart, there are a few obvious things worth checking. It is worth a minute on the seals at every shaft exit. Add the covers and guards for cracks to the same inspection. Now is the moment to inspect the impeller tip clearance.
snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What a sensible spares box holds
The economics here are lopsided. A few dollars of spares against a week of an uncleared driveway. Start with a drive belt and a pack of shear pins. Add paddles and a scraper bar if the machine is a single stage unit.
Find them on snow blower parts by stock number, which removes the guesswork entirely. There is no price advantage in waiting and there is a real availability cost. Keep it dry between seasons and most of the failures on this page never happen.
Two practical notes on choosing a snow blower snow joe 20-volt. First, match it to the surface before the snowfall, because surface is the constraint that cannot be worked around. Second, a snow blower snow joe 20-volt is only as useful as the wear parts you can get for it in February, which is why the stock numbers on this site matter more than the badge.
If you have owned a snow blower snow joe 20-volt before, you already know the failure points. If you have not, the short version is that a snow blower snow joe 20-volt fails at its consumables and almost never at its castings.
Common queries
Can I fit it myself?
In most cases yes. Make sure the seal or gasket at the base sits flat, or wet snow will pack into the gap. Work with the plug lead pulled on a petrol machine and the pack out on a cordless one.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
How long should it last?
Kept out of ultraviolet over summer, a plastic chute lasts many years.
Does fitting this affect my warranty?
Fitting a correct replacement part does not void a manufacturer warranty. Consumables were never covered in the first place.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
Reviews
There are no reviews yet.