Snow Blower Parts, Spacer Bushing, Stock #203050108

Snow Blower Parts, Spacer Bushing, Stock #203050108 is a bearing or bushing, the component that lets a shaft turn without wearing its housing away. It is listed under Parts and Accessories. The stock number is 203050108. We list this as 203050108 precisely because near identical parts are not interchangeable.

What this snow blower spacer bushing is for

A few dollars of bearing protects a shaft that costs many times more. Bearings fail quietly. By the time the noise arrives, the shaft or housing has usually taken damage.

The stock number is 203050108. It is listed under Parts and Accessories. At $2.79 Canadian, this sits where you would expect for the class.

Specification

At $2.79 Canadian, this sits where you would expect for the class. Late summer through October is when choice is widest across the whole catalogue.

Ordering from us

The figure is $2.79, quoted the way every price on this site is quoted, in Canadian dollars. Anything of this size posts normally, and the free freight threshold is $999. shipping and delivery has the detail.

The return window and the freight rules are on returns and refunds. Belts, shear pins, paddles, scraper bars and skid shoes are excluded everywhere. the warranty policy has the detail.

Questions go through the contact page and are answered by a person, not a script. Consumer rights when buying a snow blower spacer bushing in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Identifying the correct component

Stock number 203050108 is what to quote if you email us to check a fit, because it removes the guesswork entirely. Model names persist for years while the components underneath them do not.

Press rather than hammer where you can, and support the housing. Check the shaft for scoring while it is apart.

Where to find the stamped number on each part is covered in the snow blower repair guide. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

Signs it has reached the end

If the machine is doing any of the following, this is the component to examine first.

• heat at the housing after a short run
• a shaft that no longer spins freely by hand
• rust staining around the housing
• a belt that keeps failing on one pulley
• a rumble or growl that rises with shaft speed

A sealed bearing in a dry housing outlasts the machine. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Fitting it

Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Bag the fasteners by stage rather than tipping them into one tin.

Fit dry unless the manual specifies grease, and never pack a sealed unit. Keep the old part until the machine has run properly under load.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Canadian winters and this part

Canada is not one snow market. In coastal British Columbia the pattern is wet, heavy falls where moisture matters more than depth. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Reading the listing

This is catalogued as spacer, bushing, and every one of those terms is doing work. Position words such as upper, lower, left and right are the ones people skip, and they are the ones that cause returns.

This line is 203050108. Use those figures rather than a description and the fitment is settled.

What else to check

Most of what fails next is already visible while you have access. Do not close the assembly without checking the seals at every shaft exit. Look at the linkage rods and their clips before you close it up. Give every pulley and idler, spun by hand a proper look while access is easy.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

What to keep on the shelf

There is a short list of components that fail during a storm, and every one of them is inexpensive if bought before the storm. Keep the stock numbers written inside the machine cover and reordering takes under a minute.

All of it sits on snow blower parts and ships Canada wide from stock held here. October is the quiet month for this. February is not, and freight times show it. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

People shopping for a snow blower spacer bushing usually start with price and end with availability. The sensible order is the reverse. Establish that a snow blower spacer bushing of this type suits your surface and your typical snowfall, then compare what the market charges for it.

The market for a snow blower spacer bushing in Canada is thinner than it should be, which is part of why we stock this properly. A snow blower spacer bushing that nobody carries parts for is a machine with an expiry date.

Common questions