What you are looking at is the Snow Joe SJ618E. The detail that follows applies to this one and not to the category.
Snow Joe Electric Snowblower Protection Bundle | Includes Electric Snow Blower and Cover is a cover, guard, plate or bracket, a structural or protective component of the machine. The stock number is BDL-A0233. It is listed under Parts and Accessories. It is a Snow Joe item. Order this one by stock number BDL-A0233 rather than by the name of the machine it came off.
On this page
- Choosing the Snow Joe SJ618E for a Canadian driveway
- Specification and price
- How to tell it needs changing
- Installing the replacement
- In Canadian conditions
- Ordering and delivery
- Fitment and identification
- Reading the listing
- What else to check
- Keeping a spares kit
- A mid sized corded blower, with the cover it should have come with
- Full specification
- Full specification
- The cover is not an afterthought
- Where it fits in the range
- Eighteen inches, and the driveway it actually suits
- All terrain wheels on a light machine
- Clearing the chute safely, every time
- Questions we are asked about this
Choosing the Snow Joe SJ618E for a Canadian driveway
A cracked cover admits meltwater into places designed to stay dry. A machine run with a panel missing wears faster in the places nobody inspects.
It is a Snow Joe item. The stock number is BDL-A0233. It is listed under Parts and Accessories. It is priced at $277.35 in Canadian dollars, with no conversion applied at the checkout.
Specification and price
| Detail | Value |
|---|---|
| Stock number | BDL-A0233 |
| Brand | Snow Joe |
| Category | Parts and Accessories |
| Price | $277.35 CAD |
| Ships | Canada wide |
$277.35 CAD covers it, with no duty arriving at the door afterwards. A spare bought before the season is a spare, and a spare bought during one is an emergency.
How to tell it needs changing
These are the signs that come up again and again on this part.
- a bracket no longer holding its component square
- grit collecting where a guard should be
- fasteners that will not stay tight because the mounting has distorted
- a missing cover left off after an earlier repair
- rattling that changes when the panel is pressed
The life of the machine, unless it is stored under snow load. October is the quiet month for this. February is not, and freight times show it.
Installing the replacement
Take the battery out first on a cordless unit, and pull the plug cap on an engine. A magnetic tray and a bit of discipline turns this into a twenty minute job.
Check the frame threads before fitting, because a previous repair may have chased them out of shape. Do not throw the original away until the repair is proven on a real pass.
A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.
In Canadian conditions
Take the lake effect belts as the example: depth repeatedly, sometimes twice in a day. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
Ordering and delivery
It is priced at $277.35 in Canadian dollars, with no conversion applied at the checkout. Anything of this size posts normally, and the free freight threshold is $999. shipping and delivery has the detail.
What can go back, in what condition and at whose cost is on returns and refunds. Belts, shear pins, paddles, scraper bars and skid shoes are excluded everywhere. the warranty policy has the detail.
Questions go through the contact page and are answered by a person, not a script. Consumer rights when buying the Snow Joe SJ618E in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Fitment and identification
We list this as BDL-A0233 precisely because near identical parts are not interchangeable. Manufacturers change suppliers mid model, which is why two identical looking machines take different parts.
Do not overtighten into plastic. It feels secure and then cracks in the first cold snap. Renew any foam or rubber isolators at the same time.
If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. Give us the model and serial from the machine plate and the identification takes minutes rather than days.
Reading the listing
Break the name apart and you get electric, snowblower, protection, bundle, includes, cover. That is the whole specification in shorthand. Length, thread and profile change between otherwise identical looking components.
This line is BDL-A0233. That is the level of detail worth checking twice before you click buy.
What else to check
The second strip down is the expensive one, so look at the neighbours now. Now is the moment to inspect the fasteners you have just disturbed. Have a look at the seals at every shaft exit too. It is worth a minute on the linkage rods and their clips.
snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
Keeping a spares kit
Ask any small engine shop what they run out of in January and they will name the same four parts every year. Two of each consumable is the right number. One gets used and the other is why the driveway still gets cleared.
Order the whole kit in one go from snow blower parts and pay one lot of freight rather than four. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder. Where it sits from April to October matters more than most owners expect.
There is no mystery to the Snow Joe SJ618E. It is a mechanical device with a short list of wear parts, and the households that never lose a winter to one are simply the households that did the autumn checks.
A note on comparisons. Any electric snow blower can be made to look good on a specification sheet. Judge the Snow Joe SJ618E on the parts you can get for it and on how it behaves in wet snow, because those are the two things that decide whether you keep it.
A mid sized corded blower, with the cover it should have come with
This bundle pairs the Snow Joe SJ618E Ultra electric snow blower with an SJCVR-21 protective cover. The machine sits between the shovels and the 22 inch flagship: a 13 amp motor moving up to 580 pounds of snow a minute, clearing 18 inches wide by 8 inches deep with each pass.
That is a genuinely useful size. Eighteen inches is wide enough to make sensible progress on a mid sized driveway without becoming awkward to turn, and 8 inches of intake covers most overnight falls in one pass. It is the machine for someone whose driveway is too much for a shovel and who does not need or want a 22 inch unit.
Full specification
Snow Joe describe the two blade rotor as cold and abrasion resistant, and both halves of that matter. Polymers stiffen and become brittle as the temperature drops, which is precisely when a snow blower is working. A rotor compounded to stay flexible at low temperature keeps its shape and its bite on the mornings that matter, and abrasion resistance is what keeps it serviceable on rough concrete over several seasons.
Full specification
- 13 amp electric motor, mains powered
- Two blade cold and abrasion resistant rotor
- 18 inch clearing width, 8 inch clearing depth per pass
- Moves up to 580 pounds of snow per minute
- Chute rotates a full 180 degrees, with an adjustable deflector for stream height
- Easy glide all terrain wheels
- Scraper blade clears to the ground without damaging the surface
- SJCVR-21 water resistant cover included, fitting 15, 18 and 21 inch Snow Joe blowers
- ETL approved, full 2 year warranty
The cover is not an afterthought
The SJCVR-21 is heavy duty water resistant fabric that will not shrink or stretch, and it fits the machine either fully assembled for quick access during the season or with the handles folded for summer storage. What it actually protects against is the slow damage nobody photographs: road salt in meltwater, ultraviolet on plastics, tree sap and bird mess over eight idle months. Corrosion and perished plastic retire more snow blowers than wear ever does.
Where it fits in the range
Bigger than anything in our snow shovel range and more manageable than the 22 inch machines. Ideal for heavier snowfall on mid sized driveways and walkways, within reach of an outdoor socket. Not for gravel, and not for a compacted plough ridge, which needs a two stage machine.
Eighteen inches, and the driveway it actually suits
A single driveway of 10 to 12 feet comes out at seven or eight passes on an 18 inch machine, which is a brisk job. A double driveway at 16 to 18 feet is eleven or twelve, which is still perfectly manageable but starts to make a 22 inch machine look sensible. Eight inches of intake handles the great majority of overnight falls in one go.
Where this machine genuinely shines is a mid sized paved driveway with a path attached, cleared promptly, within reach of a socket. That describes an enormous number of Canadian properties, and buying wider than you need is the most common expensive mistake in the category.
All terrain wheels on a light machine
Easy glide all terrain wheels sound like marketing and are doing something specific on a machine this light. A light blower with small hard wheels stops dead against the lip where a driveway meets a path, and skitters sideways on packed snow. Wider, softer treads keep it tracking straight and let it climb small transitions without you lifting the front end, which is most of the difference between a machine that feels planted and one that feels flimsy.
Clearing the chute safely, every time
Wet snow packs into the chute of every single stage blower ever made, this one included, and the correct response is always the same. Release the trigger, unplug the machine at the socket, and clear the blockage with a stick or a broom handle. Never with a hand, and never with a gloved hand on the assumption a glove will protect you.
A jammed auger stores energy. When the blockage clears, it releases that energy instantly and without warning, and it does not care whether your hand is still in the way. People are injured this way every winter on machines of every brand and price. Unplugging takes four seconds and removes the risk entirely.
The Snow Joe SJ618E is stocked and shipped from within Canada, so there is no border charge at the door.
Nothing on this page is generic advice. It describes the Snow Joe SJ618E as actually supplied.
Everything on this page refers to the Snow Joe SJ618E specifically, not to the range it sits in.
If you are comparing the Snow Joe SJ618E against a sibling model, the specification above is where the real difference shows.
Ordering the Snow Joe SJ618E in autumn rather than mid storm is the single biggest factor in how quickly it reaches you.
Questions we are asked about this
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
How long should it last?
Storing the machine indoors roughly doubles the life of every plastic part on it.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Can I return it if it turns out to be wrong?
Yes, if it is unfitted and in its original packaging. The window and the freight rules are on the returns page.
How quickly does it ship?
Stock items leave the same or next business day. Ordering in autumn rather than mid storm is the single biggest factor in how fast it reaches you.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
Reviews
There are no reviews yet.