Everything on this page concerns one thing: this powersmart snow blower parts, in Canadian use.
PowerSmart Snow Blower Parts -Upper Drive Cable, Stock #303200152 is a control cable, the sheathed steel wire that carries a lever movement at the handle down to the clutch it operates. It is a PowerSmart item. It is listed under Parts and Accessories. The stock number is 303200152. If you are cross referencing an old component, compare the stamping against 303200152 before ordering.
On this page
Where a powersmart snow blower parts fits
The sheath keeps grit out and the inner wire does the work. When either fails the symptom is the same, vague control. Cable adjustment is the first thing a good shop checks and the last thing most owners do.
The stock number is 303200152. It is a PowerSmart item. It is listed under Parts and Accessories. It is priced at $11.15 in Canadian dollars, with no conversion applied at the checkout.

Specification and price
| Detail | Value |
|---|---|
| Stock number | 303200152 |
| Brand | PowerSmart |
| Category | Parts and Accessories |
| Price | $11.15 CAD |
| Ships | Canada wide |
You are looking at $11.15 CAD delivered into the Canadian market. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.
Doing the job properly
Take the battery out first on a cordless unit, and pull the plug cap on an engine. Keep the hardware in sequence as you strip it. Reassembly is where mismatched fasteners quietly appear.
Free the sheath ends of grit before fitting and a drop of light oil at each end keeps water out. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.
A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.
How ordering works
It is priced at $11.15 in Canadian dollars, with no conversion applied at the checkout. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.
The return window and the freight rules are on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.
Questions go through the contact page and are answered by a person, not a script. Consumer rights when buying a powersmart snow blower parts in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Making sure it is the right part
The identifier that matters here is 303200152. Machine names change between production years and the number does not. Production year matters more than model name when ordering.
Route the new cable the way the old one ran. A tight radius doubles the effort at the lever and halves the life. Leave a little free play deliberately. A cable adjusted with no slack holds the clutch part engaged all winter.
If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. Give us the model and serial from the machine plate and the identification takes minutes rather than days.
How this behaves in a real winter
Across Atlantic Canada the defining condition is depth, wind and salt air arriving together. A spare bought before the season is a spare, and a spare bought during one is an emergency.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
When to replace it
These are the signs that come up again and again on this part.
- engagement that feels vague compared with the first season
- visible fraying where the inner wire leaves the sheath
- a sheath that has kinked or been crushed
- stiffness that appears only in deep cold
- an adjuster barrel already wound to its limit
Corrosion at the exposed ends is the usual end point. Late summer through October is when choice is widest across the whole catalogue.
Reading the listing
Listed as upper, drive, cable, which is the level of precision this catalogue works at. Two lines can differ by one word and be entirely different parts.
This line is 303200152. Anything less precise than that is where wrong parts come from.
What else to check
One more inspection now saves an afternoon later in the winter. The same visit should cover the return springs at each lever. Give the belts and their guides a proper look while access is easy. Look at the shift and steering linkage before you close it up.
Everything above is stocked on snow blower parts by manufacturer stock number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
Keeping a spares kit
Keeping spares is the single cheapest thing an owner can do to protect a fifteen year machine. Belts and shear pins first, then skid shoes if you clear gravel, then a spare clearing tool because they get lost.
Find them on snow blower parts by stock number, which removes the guesswork entirely. A spare bought before the season is a spare, and a spare bought during one is an emergency. Where it sits from April to October matters more than most owners expect.
People shopping for a powersmart snow blower parts usually start with price and end with availability. The sensible order is the reverse. Establish that a powersmart snow blower parts of this type suits your surface and your typical snowfall, then compare what the market charges for it.
The market for a powersmart snow blower parts in Canada is thinner than it should be, which is part of why we stock this properly. A powersmart snow blower parts that nobody carries parts for is a machine with an expiry date.
Common queries
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What are the symptoms that this needs replacing?
a lever that must be squeezed fully before anything engages; the auger or drive still turning after the lever is released; engagement that feels vague compared with the first season. Any one of those is worth acting on before the next storm.
Can I fit it myself?
In most cases yes. Free the sheath ends of grit before fitting and a drop of light oil at each end keeps water out. Work with the plug lead pulled on a petrol machine and the pack out on a cordless one.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
How do I know this fits my machine?
Order by stock number 303200152. The same model frequently ships with different components across production years, so the stamped number is the only reliable identifier.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.





Reviews
There are no reviews yet.