This listing is a snow blower 212cc snow engine, and everything below is written about that specific configuration.
Snow Blower Parts, 212cc Snow Engine Carburetor, Stock#170021719-0001 is a fuel system component, part of the path that gets petrol from the tank into the cylinder in the right proportion. The engine displaces 212 cc. It is listed under Parts and Accessories. The stock number is 170021719-0001. Everything on this page is written against stock number 170021719-0001 rather than against the category in general.
On this page
The case for this snow blower 212cc snow engine
The fuel path is where a machine that ran perfectly in March fails in November. Ethanol blended fuel absorbs water, and water sits at the bottom of a tank all summer.
It is listed under Parts and Accessories. The engine displaces 212 cc. The stock number is 170021719-0001. The listed price is $62.72 CAD and that is the figure you pay, because the stock is already in the country.
Key figures
| Detail | Value |
|---|---|
| Stock number | 170021719-0001 |
| Engine | 212 cc |
| Category | Parts and Accessories |
| Price | $62.72 CAD |
| Ships | Canada wide |
The figure is $62.72, quoted the way every price on this site is quoted, in Canadian dollars. The parts everybody wants in February are the parts that are slowest to arrive in February.
Before you order
Order this one by stock number 170021719-0001 rather than by the name of the machine it came off. Model names persist for years while the components underneath them do not.
Note the position of every linkage and spring before removal. Refit with fresh, stabilised fuel rather than the fuel that caused the problem.
Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. Give us the model and serial from the machine plate and the identification takes minutes rather than days.
How to change it
Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.
Work on a cold engine, drain the bowl before removal and have a container ready. Compare both parts side by side first, particularly length and hole spacing.
The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.
Regional notes
Canada is not one snow market. In the prairies the pattern is dry snow that drifts back across the drive behind you. October is the quiet month for this. February is not, and freight times show it.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
When this is the fault
Components in this family announce themselves fairly consistently. Any of the following is worth acting on before the next storm.
- starting on choke and dying when the choke is opened
- a fuel smell with no start at all
- rough running that clears at full throttle
- fuel weeping from a joint after standing
- a float bowl with sediment or water in the bottom
Indefinite with stabilised fuel. Two summers of untreated pump petrol is often enough to require a clean. Buying in autumn costs the same as buying in January and arrives considerably faster.
Delivery, returns and warranty
The listed price is $62.72 CAD and that is the figure you pay, because the stock is already in the country. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.
Our terms on returns are plainer than most and they are on returns and refunds. Consumables are never covered on any badge, and the warranty policy lists them.
Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower 212cc snow engine in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Reading the listing
The words that matter in this listing are 212cc, engine, carburetor. Each one narrows the fitment. The qualifier at the end of the name is usually the one that decides the fit.
This line is 170021719-0001. The 212 cc figure is engine displacement and it should always be read against the clearing width. Use those figures rather than a description and the fitment is settled.
What else to check
Most of what fails next is already visible while you have access. Give the plug and its cap a proper look while access is easy. The same visit should cover the seals at every shaft exit. Do not close the assembly without checking the fasteners you have just disturbed.
None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What to keep on the shelf
The households that never lose a weekend to a breakdown are not lucky. They have a small box on a shelf with four or five cheap items in it. On a cordless machine the list is shorter: a spare pack and a paddle set is genuinely all most owners need.
All of it sits on snow blower parts and ships Canada wide from stock held here. Stock moves quickly once the snow starts, which is the only real argument for ordering early. An unheated shed is fine. A puddle on a garage floor is not.
The common mistake with a snow blower 212cc snow engine is buying on a single headline number. A snow blower 212cc snow engine should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.
Two things people ask about a snow blower 212cc snow engine that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower 212cc snow engine bought here, both are covered above.
Common questions
What are the symptoms that this needs replacing?
starting on choke and dying when the choke is opened; a fuel smell with no start at all; rough running that clears at full throttle. Any one of those is worth acting on before the next storm.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
How do I know this fits my machine?
Order by stock number 170021719-0001. The same model frequently ships with different components across production years, so the stamped number is the only reliable identifier.
How long should it last?
Indefinite with stabilised fuel. Two summers of untreated pump petrol is often enough to require a clean.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
Reviews
There are no reviews yet.