Snow Blower Parts, Chute, Stock #203050514

Snow Blower Parts, Chute, Stock #203050514 is a discharge chute component, the assembly that aims where the snow leaves the machine. It is listed under Parts and Accessories. The stock number is 203050514. If you are cross referencing an old component, compare the stamping against 203050514 before ordering.

This snow blower chute in practice

Everything the auger and impeller do arrives here. A restriction at this point undoes the work of both. The deflector sets throw distance as much as engine speed does.

The stock number is 203050514. It is listed under Parts and Accessories. You are looking at $34.83 CAD delivered into the Canadian market.

Technical detail

You are looking at $34.83 CAD delivered into the Canadian market. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Diagnosing it

These are the signs that come up again and again on this part.

• the chute failing to hold the direction it is set to
• cracks around the rotation collar after a cold snap
• a deflector that drops under its own weight
• throw distance shorter than it used to be with no change in engine note
• grinding or resistance when rotating the chute

The collar wears before the chute body does. Late summer through October is when choice is widest across the whole catalogue.

Ordering and delivery

$34.83 CAD covers it, with no duty arriving at the door afterwards. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.

returns and refunds sets out the window and who pays freight in which circumstances. Consumables are never covered on any badge, and the warranty policy lists them.

Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower chute in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Installing the replacement

Work with the plug lead pulled on a petrol machine and the pack out on a cordless one. A magnetic tray and a bit of discipline turns this into a twenty minute job.

Check the deflector pivot and its friction setting before assuming the chute itself is the fault. Hold the new component against the old one before fitting. Two minutes there beats stripping it twice.

A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.

Fitment and identification

The identifier that matters here is 203050514. Machine names change between production years and the number does not. A part that fitted a machine built in one year may not fit the same model built in the next.

Make sure the seal or gasket at the base sits flat, or wet snow will pack into the gap. Fit the fasteners loosely, square the assembly, then tighten in sequence.

If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. Send us the machine model, the serial number and a photograph of the old component and we will confirm the fit in writing before anything ships.

In Canadian conditions

Across the lake effect belts the defining condition is depth repeatedly, sometimes twice in a day. A spare bought before the season is a spare, and a spare bought during one is an emergency.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Reading the listing

Listed as chute, which is the level of precision this catalogue works at. Two lines can differ by one word and be entirely different parts.

This line is 203050514. Copy that reference into your order note and there is nothing left to guess.

What else to check

While the machine is apart, there are a few obvious things worth checking. The same visit should cover the seals at every shaft exit. Give the covers and guards for cracks a proper look while access is easy. Look at the impeller tip clearance before you close it up.

Order the lot together from snow blower parts and save a second delivery wait. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Building a small spares kit

Keeping spares is the single cheapest thing an owner can do to protect a fifteen year machine. Belts and shear pins first, then skid shoes if you clear gravel, then a spare clearing tool because they get lost.

Order the whole kit in one go from snow blower parts and pay one lot of freight rather than four. A spare bought before the season is a spare, and a spare bought during one is an emergency. Keep it dry between seasons and most of the failures on this page never happen.

If you are comparing this snow blower chute against something similar elsewhere, compare like for like. Kit prices against bare tool prices, and a snow blower chute quoted in Canadian dollars against one that is not, are two of the most common ways buyers mislead themselves.

One more angle on the snow blower chute question. Freight and availability across Canada shift sharply once the first storms land, so a snow blower chute ordered in October reaches you in days and the same snow blower chute ordered in January can take weeks.

Common queries