Snow Blower Parts, Dowel (Cutter) Pin, Stock #303160845

Snow Blower Parts, Dowel (Cutter) Pin, Stock #303160845 is a shear pin, the sacrificial fastener that holds the auger to its shaft. It is listed under Parts and Accessories. The stock number is 303160845. Everything on this page is written against stock number 303160845 rather than against the category in general.

Living with a snow blower dowel pin

The pin is specified to fail at a set torque, which is precisely why a stronger bolt is worse. When the auger meets ice or a paving slab edge, something has to give, and this is the something.

The stock number is 303160845. It is listed under Parts and Accessories. The listed price is $5.56 CAD and that is the figure you pay, because the stock is already in the country.

Specification

The listed price is $5.56 CAD and that is the figure you pay, because the stock is already in the country. The parts everybody wants in February are the parts that are slowest to arrive in February.

Symptoms worth acting on

There is a short list of symptoms here, and most owners recognise at least one of them.

• the engine running normally while one side of the auger does not turn
• a metallic snap during a pass followed by loss of throw
• the auger spinning freely by hand with the machine off
• uneven cutting across the housing width
• a pin visibly sheared at the shaft

Breaking several in one storm means an obstruction, not a pin problem. Buying in autumn costs the same as buying in January and arrives considerably faster.

Buying, shipping and returns

The listed price is $5.56 CAD and that is the figure you pay, because the stock is already in the country. Parcel delivery on small components, free freight once the order passes $999. shipping and delivery has the detail.

What can go back, in what condition and at whose cost is on returns and refunds. What is covered and what is treated as wear is set out on the warranty policy.

Use the contact page if you want a second opinion before ordering. Consumer rights when buying a snow blower dowel pin in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Fitting it

Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.

Never substitute a grade five or grade eight bolt. Compare both parts side by side first, particularly length and hole spacing.

Clear blockages with the tool, never with a glove, and never with the engine merely idling. The same rule applies whenever the auger housing is open.

Before you order

Order this one by stock number 303160845 rather than by the name of the machine it came off. Component changes rarely make it into the marketing, only into the parts diagram.

Fit with the correct spacer and locknut, not just the pin. Carry a spare and the two spanners in the machine, because they break at the far end of the drive.

Where to find the stamped number on each part is covered in the snow blower repair guide. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

Canadian winters and this part

Canada is not one snow market. In the Ontario and Quebec corridor the pattern is moderate depth with the plow ridge as the deciding factor. October is the quiet month for this. February is not, and freight times show it.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Reading the listing

The words that matter in this listing are dowel, cutter, pin. Each one narrows the fitment. The qualifier at the end of the name is usually the one that decides the fit.

This line is 303160845. Get that right and the rest of the order takes care of itself.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Give the gearbox for weeping grease a proper look while access is easy. The same visit should cover the auger flights for straightness. Do not close the assembly without checking the skid shoes and their setting.

All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

What to keep on the shelf

The households that never lose a weekend to a breakdown are not lucky. They have a small box on a shelf with four or five cheap items in it. On a cordless machine the list is shorter: a spare pack and a paddle set is genuinely all most owners need.

Those parts live on snow blower parts, and the maintenance checklist says when to check each of them. Stock moves quickly once the snow starts, which is the only real argument for ordering early. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.

There is no mystery to a snow blower dowel pin. It is a mechanical device with a short list of wear parts, and the households that never lose a winter to one are simply the households that did the autumn checks.

A note on comparisons. Any snow blower dowel pin can be made to look good on a specification sheet. Judge a snow blower dowel pin on the parts you can get for it and on how it behaves in wet snow, because those are the two things that decide whether you keep it.

Frequently asked