Buying a snow blower drive brushless motor in Canada comes down to a handful of decisions, and this page works through them.
Snow Blower Parts, Drive Brushless Motor, Stock#301030089 is an electrical component, part of the low voltage circuit that runs the switches, lighting and starting on the machine. The stock number is 301030089. It is listed under Parts and Accessories. The identifier that matters here is 301030089. Machine names change between production years and the number does not.
On this page
The case for this snow blower drive brushless motor
Lighting, switching and starting all run off a handful of small components that cost far less than the diagnosis time. A circuit that works in a warm garage and fails in a storm is almost always a connection, not a failure.
It is listed under Parts and Accessories. The stock number is 301030089. The figure is $51.56, quoted the way every price on this site is quoted, in Canadian dollars.
Specification
| Detail | Value |
|---|---|
| Stock number | 301030089 |
| Category | Parts and Accessories |
| Price | $51.56 CAD |
| Ships | Canada wide |
At $51.56 Canadian, this sits where you would expect for the class. October is the quiet month for this. February is not, and freight times show it.
Getting the fitment right
Two components can look identical on a bench and take different fitments, so the 301030089 reference is the safe way to buy. The same machine model frequently ships with different components across production years.
Check continuity end to end before condemning a component. Seat the connector fully. Half seated is what causes intermittent faults in the cold.
Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. A photograph settles in one message what a written description takes four exchanges to narrow down.
Buying for a Canadian winter
What a machine meets in Atlantic Canada is depth, wind and salt air arriving together, which is a different problem from the national average. The parts everybody wants in February are the parts that are slowest to arrive in February.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
Fitting notes
Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Bag the fasteners by stage rather than tipping them into one tin.
Do not pull on the wire to separate a plug. Release the latch and pull the housing. Keep the old part until the machine has run properly under load.
The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.
When this is the fault
If the machine is doing any of the following, this is the component to examine first.
- intermittent operation that changes when the harness is moved
- a light or switch that works warm and fails cold
- a starter that clicks without turning
- green or white powder at a connector face
- a fuse that blows again shortly after replacement
These components rarely wear out. They corrode. A spare bought before the season is a spare, and a spare bought during one is an emergency.
Ordering from us
The figure is $51.56, quoted the way every price on this site is quoted, in Canadian dollars. Anything of this size posts normally, and the free freight threshold is $999. shipping and delivery has the detail.
Our terms on returns are plainer than most and they are on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.
The contact page is the fastest route to a straight answer on fitment. Consumer rights when buying a snow blower drive brushless motor in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Reading the listing
Note the descriptors: drive, brushless, motor. They are not decorative. Where a name carries a size, that size is exact rather than nominal.
This line is 301030089. Quote it exactly and the right item arrives first time.
What else to check
Most of what fails next is already visible while you have access. Add the fasteners you have just disturbed to the same inspection. It is worth a minute on the covers and guards for cracks. Have a look at the pack contacts too.
We hold all of those on snow blower parts, listed by the number stamped on the part. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What to keep on the shelf
Anyone who has stood in a storm with a broken machine buys spares the following autumn. Everyone else learns the same way. The four to buy are the belt, the shear pins, the paddles and the scraper bar. Nothing else fails often enough to stock.
Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. Late summer through October is when choice is widest across the whole catalogue. An unheated shed is fine. A puddle on a garage floor is not.
Owning a snow blower drive brushless motor well is mostly about two habits: buying the consumables early and storing it dry. Get those right and a snow blower drive brushless motor outlasts the driveway it was bought for, whatever the badge on the front says.
Worth stating plainly: a snow blower drive brushless motor is a long term purchase. Treat the snow blower drive brushless motor you buy as something you will still be running in a decade, and the specification questions answer themselves.
Frequently asked
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What are the symptoms that this needs replacing?
a fuse that blows again shortly after replacement; a wire chafed through where it passes the frame; intermittent operation that changes when the harness is moved. Any one of those is worth acting on before the next storm.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
How do I know this fits my machine?
Order by stock number 301030089. The same model frequently ships with different components across production years, so the stamped number is the only reliable identifier.
Reviews
There are no reviews yet.