Snow Blower Parts, Flange Keeper, Stock #303070233

Snow Blower Parts, Flange Keeper, Stock #303070233 is a bearing or bushing, the component that lets a shaft turn without wearing its housing away. It is listed under Parts and Accessories. The stock number is 303070233. Use 303070233 when you order and the right item arrives the first time.

What this snow blower flange keeper is for

A few dollars of bearing protects a shaft that costs many times more. A dragging bearing loads a belt and a motor far harder than the operator notices.

The stock number is 303070233. It is listed under Parts and Accessories. The listed price is $9.76 CAD and that is the figure you pay, because the stock is already in the country.

Specification

The listed price is $9.76 CAD and that is the figure you pay, because the stock is already in the country. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Symptoms worth acting on

Components in this family announce themselves fairly consistently. Any of the following is worth acting on before the next storm.

• a rumble or growl that rises with shaft speed
• side to side play in a shaft that should turn true
• heat at the housing after a short run
• a shaft that no longer spins freely by hand
• rust staining around the housing

Failure usually follows a season stored outdoors. There is no price advantage in waiting and there is a real availability cost.

Getting the fitment right

If you are cross referencing an old component, compare the stamping against 303070233 before ordering. Model names persist for years while the components underneath them do not.

Support the inner race when pressing on, the outer when pressing off. Press rather than hammer where you can, and support the housing.

Where to find the stamped number on each part is covered in the snow blower repair guide. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

Regional notes

What a machine meets in coastal British Columbia is wet, heavy falls where moisture matters more than depth, which is a different problem from the national average. Late summer through October is when choice is widest across the whole catalogue.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Fitting notes

Isolate the machine before you start. Nothing on this job needs the engine turning. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.

Check the shaft for scoring while it is apart. A side by side check catches the small dimensional differences that photographs never show.

Use the clearing tool clipped to the handle. That tool exists because a stored impeller does not care how careful you are. The same rule applies whenever the auger housing is open.

Delivery, returns and warranty

The listed price is $9.76 CAD and that is the figure you pay, because the stock is already in the country. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. Belts, shear pins, paddles, scraper bars and skid shoes are excluded everywhere. the warranty policy has the detail.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower flange keeper in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Reading the listing

The distinguishing terms here are flange, keeper. Left and right are not interchangeable even when the castings appear symmetrical.

This line is 303070233. Use those figures rather than a description and the fitment is settled.

What else to check

A repair is cheapest when everything that needs doing is done at the same time. Have a look at the seals at every shaft exit too. Now is the moment to inspect the linkage rods and their clips. Add every pulley and idler, spun by hand to the same inspection.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

What to keep on the shelf

Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.

Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. The parts everybody wants in February are the parts that are slowest to arrive in February. An unheated shed is fine. A puddle on a garage floor is not.

Before you commit to a snow blower flange keeper, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a snow blower flange keeper ever will.

Where does a snow blower flange keeper sit in the wider range? Somewhere specific, which is the point of listing it separately. A snow blower flange keeper is not interchangeable with the neighbouring options, and the specification above is why.

Frequently asked