Grounding Plate Assembly for Select Greenworks 20″ Snow Throwers

Grounding Plate Assembly for Select Greenworks 20″ Snow Throwers is a cover, guard, plate or bracket, a structural or protective component of the machine. The cut is 20 inches wide. The stock number is R0209497-00. It is listed under Parts and Accessories. It is a Greenworks item. Stock number R0209497-00 is what to quote if you email us to check a fit, because it removes the guesswork entirely.

Where a snow blower grounding plate fits

Brackets hold components square. Once one is bent, the part it carries starts wearing unevenly. These parts take weather rather than load, and cold embrittlement is what finishes them.

It is a Greenworks item. It is listed under Parts and Accessories. The cut is 20 inches wide. The stock number is R0209497-00. It is priced at $12.00 in Canadian dollars, with no conversion applied at the checkout.

Specification at a glance

It is priced at $12.00 in Canadian dollars, with no conversion applied at the checkout. Buying in autumn costs the same as buying in January and arrives considerably faster.

Fitment and identification

Use R0209497-00 when you order and the right item arrives the first time. Production year matters more than model name when ordering.

Offer the part up dry first and confirm every hole lines up before committing. Renew any foam or rubber isolators at the same time.

If you are not sure where to look for the number, the snow blower repair guide has photographs of the usual locations. Where a fitment is genuinely ambiguous we will say so rather than take the order and hope.

What Canadian weather asks of it

Across the prairies the defining condition is dry snow that drifts back across the drive behind you. Buying in autumn costs the same as buying in January and arrives considerably faster.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

The replacement procedure

Work with the plug lead pulled on a petrol machine and the pack out on a cordless one. Note where the longer bolts came from. They are rarely interchangeable with the short ones.

Check the frame threads before fitting, because a previous repair may have chased them out of shape. Do not throw the original away until the repair is proven on a real pass.

A stopped auger is not a safe auger. Energy stored in the impeller releases the moment the packed snow shifts. The same rule applies whenever the auger housing is open.

How ordering works

It is priced at $12.00 in Canadian dollars, with no conversion applied at the checkout. Small items move by standard parcel service and orders over $999 ship free Canada wide. shipping and delivery has the detail.

The return window and the freight rules are on returns and refunds. What is covered and what is treated as wear is set out on the warranty policy.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a snow blower grounding plate in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

When to replace it

Watch for these. Catching any of them early is the difference between a part and a repair bill.

• a bracket no longer holding its component square
• grit collecting where a guard should be
• fasteners that will not stay tight because the mounting has distorted
• a missing cover left off after an earlier repair
• rattling that changes when the panel is pressed

Storing the machine indoors roughly doubles the life of every plastic part on it. The parts everybody wants in February are the parts that are slowest to arrive in February.

Reading the listing

What separates this from a similar looking line is grounding, plate, assembly, select, throwers. Assembly descriptors matter: an assembly includes hardware that a bare component does not.

This line is R0209497-00. The 20 inch figure is the clearing width rather than the overall width of the machine. That is the level of detail worth checking twice before you click buy.

What else to check

One more inspection now saves an afternoon later in the winter. It is worth a minute on the fasteners you have just disturbed. Add the seals at every shaft exit to the same inspection. Now is the moment to inspect the linkage rods and their clips.

snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Building a small spares kit

The economics here are lopsided. A few dollars of spares against a week of an uncleared driveway. Start with a drive belt and a pack of shear pins. Add paddles and a scraper bar if the machine is a single stage unit.

Order the whole kit in one go from snow blower parts and pay one lot of freight rather than four. There is no price advantage in waiting and there is a real availability cost. Keep it dry between seasons and most of the failures on this page never happen.

Owning a snow blower grounding plate well is mostly about two habits: buying the consumables early and storing it dry. Get those right and a snow blower grounding plate outlasts the driveway it was bought for, whatever the badge on the front says.

Worth stating plainly: a snow blower grounding plate is a long term purchase. Treat the snow blower grounding plate you buy as something you will still be running in a decade, and the specification questions answer themselves.

Common queries