Snow Blower Parts, Spacer Bush, Stock #203050140

Snow Blower Parts, Spacer Bush, Stock #203050140 is a shaft, rod or linkage component, the part that transmits movement from one place on the machine to another. It is listed under Parts and Accessories. The stock number is 203050140. Use 203050140 when you order and the right item arrives the first time.

Where a snow blower spacer bush fits

Nothing here breaks dramatically. It loosens, and the machine gets worse gradually enough that nobody notices. These components take small loads constantly, all winter.

The stock number is 203050140. It is listed under Parts and Accessories. At $8.36 Canadian, this sits where you would expect for the class.

Key figures

The figure is $8.36, quoted the way every price on this site is quoted, in Canadian dollars. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Signs it has reached the end

Components in this family announce themselves fairly consistently. Any of the following is worth acting on before the next storm.

• a control with noticeable free movement before it acts
• a rattle at idle that disappears under load
• uneven engagement between one setting and the next
• a linkage that has visibly bent
• a missing or distorted retaining clip

The rods themselves rarely wear out. There is no price advantage in waiting and there is a real availability cost.

Regional notes

Canada is not one snow market. In the lake effect belts the pattern is depth repeatedly, sometimes twice in a day. Late summer through October is when choice is widest across the whole catalogue.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Fitting notes

Disconnect the spark plug lead before anything else. It costs five seconds and removes the whole category of accident. Bag the fasteners by stage rather than tipping them into one tin.

Check every position through its full travel after adjustment. Keep the old part until the machine has run properly under load.

The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.

Ordering from us

At $8.36 Canadian, this sits where you would expect for the class. Parcel delivery on small components, free freight once the order passes $999. shipping and delivery has the detail.

returns and refunds sets out the window and who pays freight in which circumstances. What is covered and what is treated as wear is set out on the warranty policy.

We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower spacer bush in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Getting the fitment right

If you are cross referencing an old component, compare the stamping against 203050140 before ordering. Component changes rarely make it into the marketing, only into the parts diagram.

Grease the pivots lightly rather than heavily, because heavy grease collects grit. Replace the retaining clips and pins at the same time. They are pennies and they are what wears.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.

Reading the listing

The distinguishing terms here are spacer, bush. Left and right are not interchangeable even when the castings appear symmetrical.

This line is 203050140. Get that right and the rest of the order takes care of itself.

What else to check

Since the assembly is open, spend five minutes on what sits next to it. Have a look at the bearings for play and roughness too. Now is the moment to inspect the return springs at each lever. Add the fasteners you have just disturbed to the same inspection.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Planning ahead for February

Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.

Those parts live on snow blower parts, and the maintenance checklist says when to check each of them. The parts everybody wants in February are the parts that are slowest to arrive in February. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.

The common mistake with a snow blower spacer bush is buying on a single headline number. A snow blower spacer bush should be judged on how the whole specification fits together against your driveway, your surface and the way snow arrives where you live.

Two things people ask about a snow blower spacer bush that the specification does not answer. How it behaves in wet snow, and how easy it is to get parts. On a snow blower spacer bush bought here, both are covered above.

Frequently asked