Snow Blower Parts -Seal Ring, Stock #302130005

Snow Blower Parts -Seal Ring, Stock #302130005 is a seal or gasket, the component that keeps fluid in and grit out of a joint. The stock number is 302130005. It is listed under Parts and Accessories. We list this as 302130005 precisely because near identical parts are not interchangeable.

What this snow blower seal ring is for

A weeping gearbox seal admits water and grit as readily as it lets grease out. Seals are cheap and the damage they prevent is not.

It is listed under Parts and Accessories. The stock number is 302130005. The listed price is $6.97 CAD and that is the figure you pay, because the stock is already in the country.

Specification

The figure is $6.97, quoted the way every price on this site is quoted, in Canadian dollars. Late summer through October is when choice is widest across the whole catalogue.

Before you order

Stock number 302130005 is what to quote if you email us to check a fit, because it removes the guesswork entirely. Component changes rarely make it into the marketing, only into the parts diagram.

Fit seals square, with the lip facing the fluid. Torque the joint evenly in a cross pattern.

Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. If the stamping has worn away, a clear photograph of the part in place is usually enough for us to identify it.

Symptoms worth acting on

If the machine is doing any of the following, this is the component to examine first.

• grease or oil weeping at a joint
• a fine grit paste around a shaft exit
• fuel smell from a component that should be sealed
• a hardened or flattened gasket on removal
• staining below a joint after the machine has stood

Five to ten years is ordinary. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.

Buying, shipping and returns

The figure is $6.97, quoted the way every price on this site is quoted, in Canadian dollars. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.

What can go back, in what condition and at whose cost is on returns and refunds. the warranty policy explains what the manufacturer covers and what counts as a consumable.

Questions go through the contact page and are answered by a person, not a script. Consumer rights when buying a snow blower seal ring in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Canadian winters and this part

What a machine meets in the prairies is dry snow that drifts back across the drive behind you, which is a different problem from the national average. Stock moves quickly once the snow starts, which is the only real argument for ordering early.

Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.

best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.

Fitting notes

A pulled plug lead is the difference between a repair and an incident report. Photograph each stage as you go. It takes seconds and saves an hour at reassembly.

Clean both faces properly and never reuse a compressed gasket. Keep the old part until the machine has run properly under load.

The chute rule is the one that matters: engine off, auger stopped, and the clearing tool rather than a hand. The same rule applies whenever the auger housing is open.

Reading the listing

This is catalogued as seal, ring, and every one of those terms is doing work. Position words such as upper, lower, left and right are the ones people skip, and they are the ones that cause returns.

This line is 302130005. Get that right and the rest of the order takes care of itself.

What else to check

Most of what fails next is already visible while you have access. Do not close the assembly without checking the bearings for play and roughness. Look at the gearbox for weeping grease before you close it up. Give the fasteners you have just disturbed a proper look while access is easy.

None of those are expensive, and snow blower parts has them by number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.

Planning ahead for February

There is a short list of components that fail during a storm, and every one of them is inexpensive if bought before the storm. Keep the stock numbers written inside the machine cover and reordering takes under a minute.

Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. October is the quiet month for this. February is not, and freight times show it. Store it off a bare concrete floor. Concrete wicks moisture and rusts steel from the underside where nobody looks.

Before you commit to a snow blower seal ring, pace the driveway and note the surface. Those two facts settle more of the decision than any review of a snow blower seal ring ever will.

Where does a snow blower seal ring sit in the wider range? Somewhere specific, which is the point of listing it separately. A snow blower seal ring is not interchangeable with the neighbouring options, and the specification above is why.

Frequently asked