Here is the honest picture on this snow blower friction wheel, written for Canadian conditions rather than for a catalogue.
Snow Blower Parts, Friction wheel assembly, Stock #202170002 is a wheel, tyre or drive component, part of what puts the machine forward through the snow. It is listed under Parts and Accessories. The stock number is 202170002. Use 202170002 when you order and the right item arrives the first time.
On this page
Living with a snow blower friction wheel
Tyre condition is the first thing to check when a machine starts pulling to one side. Everything the engine produces reaches the ground through this part of the machine.
The stock number is 202170002. It is listed under Parts and Accessories. The figure is $34.84, quoted the way every price on this site is quoted, in Canadian dollars.
The numbers
| Detail | Value |
|---|---|
| Stock number | 202170002 |
| Category | Parts and Accessories |
| Price | $34.84 CAD |
| Ships | Canada wide |
The figure is $34.84, quoted the way every price on this site is quoted, in Canadian dollars. Stock moves quickly once the snow starts, which is the only real argument for ordering early.
When this is the fault
There is a short list of symptoms here, and most owners recognise at least one of them.
- a friction drive that slips once warm
- a tyre that will not hold pressure through a week
- uneven tread wear side to side
- play at the axle that was not there last season
- wheelspin on a slope or on packed ice
Tyres last many seasons. Friction rings are a wear item and should be treated like a belt. There is no price advantage in waiting and there is a real availability cost.
Buying, shipping and returns
The listed price is $34.84 CAD and that is the figure you pay, because the stock is already in the country. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.
Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. the warranty policy explains what the manufacturer covers and what counts as a consumable.
We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower friction wheel in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Canadian winters and this part
What a machine meets in the lake effect belts is depth repeatedly, sometimes twice in a day, which is a different problem from the national average. Late summer through October is when choice is widest across the whole catalogue.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
Getting the fitment right
If you are cross referencing an old component, compare the stamping against 202170002 before ordering. Component changes rarely make it into the marketing, only into the parts diagram.
Check the drive plate for scoring while the wheel is off. A glazed friction ring is a common and cheap fault that looks like a failing transmission.
Diagnosis before ordering saves a return, and the snow blower repair guide is written for exactly that. Send us the machine model, the serial number and a photograph of the old component and we will confirm the fit in writing before anything ships.
How to change it
Isolate the machine before you start. Nothing on this job needs the engine turning. Lay the fasteners out in the order they came off. Outdoor power equipment uses more thread sizes in one assembly than people expect.
Fit tyres as a pair where possible so the machine tracks straight. A side by side check catches the small dimensional differences that photographs never show.
Clear blockages with the tool, never with a glove, and never with the engine merely idling. The same rule applies whenever the auger housing is open.
Reading the listing
The distinguishing terms here are friction, wheel, assembly. Left and right are not interchangeable even when the castings appear symmetrical.
This line is 202170002. Quote it exactly and the right item arrives first time.
What else to check
A repair is cheapest when everything that needs doing is done at the same time. Have a look at the bearings for play and roughness too. Now is the moment to inspect the shift and steering linkage. Add the fasteners you have just disturbed to the same inspection.
All of it sits on snow blower parts with the profile and length printed on each listing. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
The autumn order
Most emergency repairs are emergencies only because the part was not already in the garage. A belt, a pack of shear pins, a set of auger paddles on a single stage machine and a spare scraper bar cover almost every in season failure.
Everything on that list is on snow blower parts, searchable by the number stamped on the old component rather than by machine name. The parts everybody wants in February are the parts that are slowest to arrive in February. A pallet or a length of timber under the machine over summer is the cheapest rust prevention there is.
Two practical notes on choosing a snow blower friction wheel. First, match it to the surface before the snowfall, because surface is the constraint that cannot be worked around. Second, a snow blower friction wheel is only as useful as the wear parts you can get for it in February, which is why the stock numbers on this site matter more than the badge.
If you have owned a snow blower friction wheel before, you already know the failure points. If you have not, the short version is that a snow blower friction wheel fails at its consumables and almost never at its castings.
Common questions
What are the symptoms that this needs replacing?
wheelspin on a slope or on packed ice; the machine pulling steadily to one side; a friction drive that slips once warm. Any one of those is worth acting on before the next storm.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
How long should it last?
Tyres last many seasons. Friction rings are a wear item and should be treated like a belt.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What else should I check while it is apart?
Whatever the component touches. Bearings, seals, fasteners and belts are cheap while the assembly is open and expensive once it is closed.
Does fitting this affect my warranty?
Fitting a correct replacement part does not void a manufacturer warranty. Consumables were never covered in the first place.
Reviews
There are no reviews yet.