What you are looking at is a snow blower lawn mower parts. The detail that follows applies to this one and not to the category.
Lawn mower Parts, Deep groove ball bearing, Stock #303100103 is a bearing or bushing, the component that lets a shaft turn without wearing its housing away. The stock number is 303100103. It is listed under Parts and Accessories. Order this one by stock number 303100103 rather than by the name of the machine it came off.
On this page
- Choosing a snow blower lawn mower parts for a Canadian driveway
- Specification at a glance
- Fitment and identification
- How to tell it needs changing
- Getting it to you
- In Canadian conditions
- The replacement procedure
- Reading the listing
- What else to check
- What a sensible spares box holds
- Questions we are asked about this
Choosing a snow blower lawn mower parts for a Canadian driveway
Water sitting in a housing over summer is what ends most bearings on this equipment. This is a component where a small early replacement avoids a large later one.
It is listed under Parts and Accessories. The stock number is 303100103. It is priced at $27.88 in Canadian dollars, with no conversion applied at the checkout.

Specification at a glance
| Detail | Value |
|---|---|
| Stock number | 303100103 |
| Category | Parts and Accessories |
| Price | $27.88 CAD |
| Ships | Canada wide |
You are looking at $27.88 CAD delivered into the Canadian market. A spare bought before the season is a spare, and a spare bought during one is an emergency.
Fitment and identification
We list this as 303100103 precisely because near identical parts are not interchangeable. Production year matters more than model name when ordering.
Check the shaft for scoring while it is apart. Renew the seal alongside the bearing.
the snow blower repair guide shows where the manufacturer stock number is stamped on each common component. We would far rather answer a question than process a return, so ask before you order if there is any doubt.
How to tell it needs changing
These are the signs that come up again and again on this part.
- side to side play in a shaft that should turn true
- heat at the housing after a short run
- a shaft that no longer spins freely by hand
- rust staining around the housing
- a belt that keeps failing on one pulley
Water is the enemy, not hours. October is the quiet month for this. February is not, and freight times show it.
Getting it to you
It is priced at $27.88 in Canadian dollars, with no conversion applied at the checkout. Shipping is calculated at the checkout and disappears entirely over $999. shipping and delivery has the detail.
returns and refunds sets out the window and who pays freight in which circumstances. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.
We would rather answer a question than process a return, so ask through the contact page. Consumer rights when buying a snow blower lawn mower parts in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
In Canadian conditions
Take the prairies as the example: dry snow that drifts back across the drive behind you. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder.
Freight across the country slows once the first storms arrive, so autumn is when a spare actually reaches you quickly. Thirty year normals for your own station are published free by Environment and Climate Change Canada.
best snow blowers in Canada sorts picks by snowfall band and snow blower prices in Canada sets out what each class costs in Canadian dollars.
The replacement procedure
Take the battery out first on a cordless unit, and pull the plug cap on an engine. Note where the longer bolts came from. They are rarely interchangeable with the short ones.
Support the inner race when pressing on, the outer when pressing off. Do not throw the original away until the repair is proven on a real pass.
Impeller injuries remain the most common serious accident with this equipment, and they happen to experienced operators who took one shortcut. The same rule applies whenever the auger housing is open.
Reading the listing
Break the name apart and you get deep, groove, ball, bearing. That is the whole specification in shorthand. Length, thread and profile change between otherwise identical looking components.
This line is 303100103. Copy that reference into your order note and there is nothing left to guess.
What else to check
One more inspection now saves an afternoon later in the winter. Now is the moment to inspect the seals at every shaft exit. Have a look at the linkage rods and their clips too. It is worth a minute on every pulley and idler, spun by hand.
snow blower parts carries the whole list, searchable by stock number rather than by machine name. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What a sensible spares box holds
Ask any small engine shop what they run out of in January and they will name the same four parts every year. Two of each consumable is the right number. One gets used and the other is why the driveway still gets cleared.
Find them on snow blower parts by stock number, which removes the guesswork entirely. Order before the first forecast moves demand and the item is on a shelf rather than on a backorder. Where it sits from April to October matters more than most owners expect.
There is no mystery to a snow blower lawn mower parts. It is a mechanical device with a short list of wear parts, and the households that never lose a winter to one are simply the households that did the autumn checks.
A note on comparisons. Any snow blower lawn mower parts can be made to look good on a specification sheet. Judge a snow blower lawn mower parts on the parts you can get for it and on how it behaves in wet snow, because those are the two things that decide whether you keep it.
Questions we are asked about this
How do I know this fits my machine?
Order by stock number 303100103. The same model frequently ships with different components across production years, so the stamped number is the only reliable identifier.
Can I fit it myself?
In most cases yes. Check the shaft for scoring while it is apart. Work with the plug lead pulled on a petrol machine and the pack out on a cordless one.
Is a generic equivalent acceptable?
Sometimes, and often not. Pitch, grade, profile and length are all specified. Where a genuine part is unavailable we will say so rather than sell you a guess.
How quickly does it ship?
Stock items leave the same or next business day. Ordering in autumn rather than mid storm is the single biggest factor in how fast it reaches you.
Should I buy a spare?
If it is a consumable, yes, and buy it in autumn. The parts everybody needs in February are the slowest to arrive in February.
What tools will I need?
Ordinary metric spanners and sockets cover most of this job, plus a torque wrench if the manual specifies a figure. Nothing here needs a special tool.





Reviews
There are no reviews yet.