What you are looking at is a snow blower pressing plate. The detail that follows applies to this one and not to the category.
Snow Blower Parts, Pressing Plate,stock#302080019 is a cover, guard, plate or bracket, a structural or protective component of the machine. The stock number is 302080019. It is listed under Parts and Accessories. Two components can look identical on a bench and take different fitments, so the 302080019 reference is the safe way to buy.
On this page
This snow blower pressing plate in practice
A cracked cover admits meltwater into places designed to stay dry. Structural panels also stiffen the frame more than their appearance suggests.
It is listed under Parts and Accessories. The stock number is 302080019. You are looking at $5.58 CAD delivered into the Canadian market.
Specification at a glance
| Detail | Value |
|---|---|
| Stock number | 302080019 |
| Category | Parts and Accessories |
| Price | $5.58 CAD |
| Ships | Canada wide |
It is priced at $5.58 in Canadian dollars, with no conversion applied at the checkout. There is no price advantage in waiting and there is a real availability cost.
The replacement procedure
Take the battery out first on a cordless unit, and pull the plug cap on an engine. Keep the hardware in sequence as you strip it. Reassembly is where mismatched fasteners quietly appear.
Offer the part up dry first and confirm every hole lines up before committing. Check the replacement against what came off before you commit to the build.
Impeller injuries remain the most common serious accident with this equipment, and they happen to experienced operators who took one shortcut. The same rule applies whenever the auger housing is open.
Ordering and delivery
$5.58 CAD covers it, with no duty arriving at the door afterwards. Canada wide delivery, with freight free above $999. shipping and delivery has the detail.
What can go back, in what condition and at whose cost is on returns and refunds. Every machine carries its full manufacturer warranty. The exclusions are on the warranty policy.
The contact page is the fastest route to a straight answer on fitment. Consumer rights when buying a snow blower pressing plate in Canada, above any retailer policy, are set out by Consumer Protection Ontario.
Making sure it is the right part
Everything on this page is written against stock number 302080019 rather than against the category in general. A part that fitted a machine built in one year may not fit the same model built in the next.
Fit fasteners loosely, square the panel, then tighten. Forcing a bracket stresses its mounting points. Do not overtighten into plastic. It feels secure and then cracks in the first cold snap.
Start with the snow blower repair guide if the fault has not been narrowed down yet. Fitment questions get answered the same business day, which is faster than a wrong part takes to arrive.
When to replace it
The warning signs are not subtle once you know what to look for.
- a bracket no longer holding its component square
- grit collecting where a guard should be
- fasteners that will not stay tight because the mounting has distorted
- a missing cover left off after an earlier repair
- rattling that changes when the panel is pressed
Steel brackets outlast the machine if kept painted. Stock moves quickly once the snow starts, which is the only real argument for ordering early.
What Canadian weather asks of it
Before comparing anything, establish three facts about your own property: the length of the drive, whether any part of it is unpaved, and how deep it gets in one ordinary storm. Those three settle most purchasing arguments in about four minutes.
Canadian snowfall normals by station come from Environment and Climate Change Canada. Read event depth rather than annual total.
Reading the listing
Read the description literally: pressing, plate. Those terms are how this differs from the neighbouring line. A part described as upper is not the lower equivalent, however similar the two look on a bench.
This line is 302080019. Anything less precise than that is where wrong parts come from.
What else to check
One more inspection now saves an afternoon later in the winter. Look at the fasteners you have just disturbed before you close it up. Do not close the assembly without checking the seals at every shaft exit. The same visit should cover the linkage rods and their clips.
Everything above is stocked on snow blower parts by manufacturer stock number. the maintenance checklist sets out the seasonal order to work through them in, and the snow blower repair guide covers what to do when one of them turns out to be the real fault.
What a sensible spares box holds
The spares worth owning are the ones that fail on a Sunday. A belt, the pins, and whichever rubber component touches the ground on your machine. Buy them in October, put them in a labelled box, and forget about them until the morning something lets go.
Our parts catalogue is searchable by stock number, which is the only identifier that survives a model year change.
Common queries
Can I use it on gravel?
No. Anything that contacts the ground will pick up and throw stone, which is a safety limit rather than a preference.
How is it delivered?
Standard parcel service, with free freight on orders over $999.
What if it turns out to be the wrong item?
Unfitted items in original packaging can go back. The window and the freight rules are on the returns page.
How quickly does it ship?
Stock items leave the same or next business day. Ordering in autumn rather than mid storm makes far more difference to arrival time than anything else.
What is the stock number?
This line is 302080019. Quote that when ordering and the right item arrives first time.
Will it cope with wet snow?
Within its class, yes. Wet snow is denser and slows every machine, so take it in narrower bites rather than at full width.
How this one differs from the line beside it
Where this differs is stock number 302080019. Order against 302080019 rather than against a description. That number is what our catalogue and the manufacturer parts diagram agree on, and it survives the model name changes that happen between production years.
| Attribute | This listing |
|---|---|
| stock number 302080019 | stock number 302080019 |
| Full title | Snow Blower Parts, Pressing Plate,stock#302080019 |
Buyers who return one of these almost always chose on appearance. The specification above is the part worth reading twice. Quoting 302080019 at the point of order removes every ambiguity between this line and its neighbours.
Which of these you actually want
Two components can sit next to each other in a catalogue, share a photograph and fit nothing in common. This one is 302080019. Position words, thread sizes and assembly descriptors are the whole difference and they are the part people skip.
If you are working from a parts diagram, match the callout number to the stock number rather than to the picture. Diagrams are drawn once and reused across several production years, so the illustration is often a generation behind the component actually fitted.
Send us the model and serial from the machine plate if you are not certain which variant you are looking at, and we will confirm it before anything ships.
Snow blower pressing plate, in short
If you are searching for a snow blower pressing plate and want the answer without the reading, this listing is it. A snow blower pressing plate is judged on fit and on supply rather than on badge, and both are covered above. Order the snow blower pressing plate you actually need rather than the one that photographs best.
Related products
-
Parts & Accessories
Snow Joe 20-Volt Cordless Snow Shovel Kit | Directional Chute | Brushless Motor | W/ 5.0-Ah Battery + Charger
Original price was: $320.56.$209.06Current price is: $209.06. Add to cart
Reviews
There are no reviews yet.