24″ Snow Blower, 212 cc, electric and recoil start, heated handles, LED light

24″ Snow Blower, 212 cc, electric and recoil start, heated handles, LED light is a petrol driven snow blower built for Canadian snowfall. The engine displaces 212 cc. It is listed under Gas Snow Blowers and Two-Stage Snow Blowers. The stock number is ext-8013778059338. The grips are heated. Order this 24 inch two stage snow blower by stock number ext-8013778059338 rather than by the name of the 24 inch two stage snow blower it came off.

Living with a 24 inch two stage snow blower

A petrol machine carries its energy as liquid fuel, which is why it holds a sustained load for an hour without fading. A well maintained petrol machine is a fifteen year purchase rather than a five year one.

The cut is 24 inches wide. Starting is electric with a recoil backup. The grips are heated. The stock number is ext-8013778059338. $1,249.00 CAD covers it, with no duty arriving at the door afterwards.

Specification at a glance

$1,249.00 CAD covers it, with no duty arriving at the door afterwards. A spare bought before the season is a spare, and a spare bought during one is an emergency.

Keeping it working

Read the run in instructions before the first storm rather than during it. The first oil change comes early. Damp storage does more damage over one summer than a whole winter of clearing does. snow blower storage sets out the April routine in full.

Wear parts are cheap in autumn and slow in January. We hold them on snow blower parts with the manufacturer stock number on every listing, and the maintenance checklist says when to check each one. Late summer through October is when choice is widest across the whole catalogue.

Impeller injuries remain the most common serious accident with this equipment, and they happen to experienced operators who took one shortcut. Guidance for powered snow removal in Canada is published by Canadian Centre for Occupational Health and Safety.

• an oil change once a season
• a carburettor clean every few years
• belts and shear pins checked each autumn
• skid shoes set for the surface

Built for a Canadian season

A machine is sized by your local season, not by the country. Ottawa, Ontario averages roughly 224 centimetres of snow in a season. Spread across a typical twenty to thirty snowfall events, that is a machine being asked to work most weeks from December through March rather than occasionally.

At 24 inches of clearing width, a standard two car driveway takes about 12 passes on this 24 inch two stage snow blower, and in a 224 centimetre season you would expect to make those passes twenty times or more. That repetition, not any single storm, is what separates equipment that lasts from equipment that does not. Use your own seasonal total as the input. the repair guide explains why that changes the answer.

Ordering and delivery

You are looking at $1,249.00 CAD delivered into the Canadian market. Machines of this size travel on a pallet and the driver telephones before arriving. shipping and delivery has the detail.

Before starting a return, read returns and refunds, because a machine that has had fuel through it is treated differently. the warranty policy explains what the manufacturer covers and what counts as a consumable.

If anything here is unclear the contact page reaches somebody who has taken these machines apart. Consumer rights when buying a 24 inch two stage snow blower in Canada, above any retailer policy, are set out by Consumer Protection Ontario.

Who it suits

Clearing width is a time calculation before it is anything else. Pace the driveway, divide by the width, and that is your pass count every heavy morning for the life of the 24 inch two stage snow blower. The trade is maintenance. In exchange the 24 inch two stage snow blower does not care how deep the snow is.

Density matters more than depth once the temperature sits near freezing. The bank the municipal plow leaves across the entrance is the densest material the 24 inch two stage snow blower meets all season.

If you are choosing between classes rather than sizes, single stage against two stage is the shorter read and what size snow blower you need works through the four measurements that settle it.

Reading the listing

Break the name apart and you get electric, recoil, start, heated, handles, led, light. That is the whole specification in shorthand. Length, thread and profile change between otherwise identical looking components.

This line is ext-8013778059338. The 24 inch figure is the clearing width rather than the overall width of the 24 inch two stage snow blower. The 212 cc figure is engine displacement and it should always be read against the clearing width. Anything less precise than that is where wrong parts come from.

Read next

Related reading, chosen for the question this listing usually raises. They cover the decisions that come before and after this one.

• the maintenance schedule
• the contact page
• the parts catalogue

Parts and long term support

The support behind the purchase. We list wear parts for this 24 inch two stage snow blower by manufacturer stock number rather than by generic description, which means shear pins, belts, scraper bars, friction rings and carburettor kits can be matched to your exact unit rather than to something that looks similar in a photograph. On a 24 inch machine the scraper and paddle are the parts that decide whether a clean pass stays clean, and both are consumables rather than failures.

Everything is catalogued on the parts catalogue. Fitment questions go to the contact page and we answer them with the stock number, not a maybe.

What a 24 inch cut means on your driveway

The honest way to judge a 24 inch machine is to count passes. Pace your own drive, divide by the cut, and the number below is what you get.

These are clean pass figures. Nobody clears a driveway without stopping, so the real number is a little higher and the comparison between widths still holds. If your own drive is not on that list, the sizing guide works through the four measurements that settle it.

What this 24 inch two stage snow blower will not do

Every machine has a boundary, and a listing that only lists strengths is not telling you where yours is.

• It is not quiet. Early morning clearing on a close street will be noticed.
• It is more machine than a short paved city driveway needs, and the storage footprint is the usual regret.
• It will not sit on a shelf. Plan a floor space with room to walk around it.
• It cannot be run in an enclosed garage. A petrol engine produces carbon monoxide and that rule has no exceptions.

We would rather you read that and walk away. If you do, the contact page will find the alternative.

Where the price sits

The neighbours on the price list, and what the gap between them buys.

Stepping down to 40″ Snow Blower for DCS unit saves $220.00, and stepping up to 32″ Motorized brush and 22″ snow blower , 2 in 1, 212 cc costs a further $50.00. Cost per inch is a blunt measure and it ignores drive systems, engine size and build, but it is honest about what the gap between two machines is buying you in raw clearing width. Read it alongside the sizing table above rather than on its own, because a wider machine you cannot store or turn is not a saving.

What it costs to own for five seasons

Five seasons of ownership, costed honestly, including the parts nobody mentions at the point of sale.

We stock every consumable on that list by manufacturer stock number on the parts catalogue.

Going one size up, or one size down

Width is the decision. Here is what moving either side of 24 inches actually buys you.

Measure the narrowest gate and the shed door before you measure the driveway. A machine that will not reach the back garden is the most common expensive mistake in this category, and it is entirely avoidable with a tape measure. Going wider is only a saving if you can still turn it comfortably at the end of every pass, which is where a 24 inch machine earns or loses its keep.

What goes wrong, and the part that fixes it

A short troubleshooting table, written from the calls we take rather than from a manual.

You will find all of them on the parts catalogue. Read the repair guide before ordering if the symptom is ambiguous.

Your first season with a 24 inch two stage snow blower

The setup that decides whether year one is quiet or annoying.

1. Keep shear pins in the drawer. They are cents each and they fail in the plow ridge, on a Sunday.
2. Set the skid shoes to the surface. Paved wants them low, gravel wants a quarter inch of clearance under the scraper.
3. Check the oil before the first pull, then again after the first two hours. New engines settle and the level moves.
4. Note where you will refuel. Never indoors, never while hot.
5. Fill with fresh fuel and add stabiliser on day one, not in April. Most no start calls in December trace back to fuel left untreated over summer.

Once the season is running, the maintenance schedule covers what to check monthly, and the buying guide explains why each of these steps matters.

Storing a 24 inch two stage snow blower for the summer

The off season matters more than most owners expect.

• Leave the fuel valve closed and the plug lead off so nothing turns over by accident.
• Grease the chute collar and the auger fittings before it sits, not after.
• Run the tank dry or fill it and dose with stabiliser. Half a tank of untreated petrol over a Canadian summer is the single most reliable way to guarantee a no start in December.
• Store it off a concrete floor if you can. Concrete wicks moisture into the underside of the 24 inch two stage snow blower.

the maintenance schedule covers the monthly checks; the parts catalogue carries the parts you will have identified doing this.

Common queries